Polaris RZR XP 1000 Service Manual page 435

Hide thumbs Also See for RZR XP 1000:
Table of Contents
3. Install lower radius rod bolt, washer and new nut.
Torque to specification.
Radius Rod to Bearing Carrier Bolt:
40 ft-lb (54 Nm)
4. Install the pad adjustment screw and turn until
stationary pad contacts disc, then back off 1/2 turn.
5. Follow bleeding procedure outlined earlier in this
chapter.
6. Install wheel and torque wheel nuts to specification.
Wheel Nuts:
120 ft-lbs (163 Nm)
NOTE: If new pads are installed, refer to Brake
Burnishing Procedure, page 9.32.
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
BRAKE SYSTEM
9.37
9
Table of Contents
loading

This manual is also suitable for:

Rzr xp4 1000

Table of Contents