Table of Contents
FINAL DRIVE
7. Align spring retainer dowel pin with ring gear dowel
pin and install the retainer on top of the torsion
spring.
8. Check the action of the torsion spring by rotating in
both directions to ensure the spring and retainer are
installed properly.
7.38
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
9. Install armature plate. Be sure all of the armature
plate tabs are fully engaged into the roll cage
assembly and that it is resting properly on the torsion
spring retainer.
NOTE: Verify armature plate tabs are in the roll
cage slots and that it rests properly on the spring
retainer.
10. Carefully install the ring gear and roll cage assembly
into the gearcase housing.
11. Install a new O-ring on the cover plate assembly.
NOTE: Be sure the square O-ring is placed flat
on the cover surface. If the O-ring is twisted fluid
leakage may occur.
Chapters
Table of Contents
Troubleshooting
Related Manuals for Polaris RZR XP 1000
Related Products for Polaris RZR XP 1000
- Polaris RZR XP 1000 EPS High Lifter Edition
- Polaris RZR XP 1000 EPS 2019
- Polaris RZR XP 1000 EPS Trails & Rocks 2019
- Polaris RZR XP 1000 EPS
- Polaris RZR XP 1000 TRAILS ANDROCKS EDITION 2020
- Polaris RZR XP 1000 2022
- Polaris RZR XP 1000 Trails and Rocks Edition 2022
- Polaris RZR XP 4 TURBO S VELOCITY 2019