Table of Contents
ENGINE / COOLING SYSTEM
16. Remove the eight M10
lower crankcase bolts. Discard the eight M10 bolts.
17. Tap on the lower crankcase in reinforced areas with
a soft faced hammer to loosen. Carefully lift up and
remove the lower crankcase half.
3.50
, two M8
and one M6
17
18
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
Balance Shaft Removal / Inspection
16
1. Perform Crankcase Disassembly / Inspection, page
3.48 procedure.
2. Note timing marks on balance shaft and crankshaft
drive gears. Shafts must be properly timed upon
assembly.
3. Carefully rotate the balance shaft
from the crankcase.
4. Inspect the balance shaft gear teeth for damage.
and remove it
Chapters
Table of Contents
Troubleshooting
