Motorola Symbol CS3000 Series Setup Manual

Symbol CS3000 Series – Setup Guide

*For additional information, consult the Symbol CS3000 Series Quick Reference Guide, included with your device

1. Introduction

To charge the scanner, connect it to a host PC with the supplied USB cable or optional charging cradle.

Charge time is approximately 3 hours for a fully discharged battery

To test battery status, hold scan (+) for 15 seconds:

Flashing green LED: full charge

Flashing amber LED: < 8 hours operating time

Flashing red LED: < 1 hour operating time

2. Scanning

2 modes of operation:

Batch – disconnected from a host computer, stores scanned barcodes on device with a date/timestamp

Bluetooth* – communicates with host computer via Bluetooth connection, emulates a keyboard

Aim the scanner at the bar code, press the scan (+) button. Scanner beeps once and LED turns green to

indicate a successful scan.

Page 1

Symbol CS3000 Series – Setup Guide

5-Star Students