Page 1
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., MOONACHIE, NEW JERSEY, U.S.A. OF EMERSON RADIO CORP., MOONACHIE, NEW JERSEY, U.S.A. LF501EM5F EN Owner's Manual EN Owner's Manual ES Manual del Propietario ES Manual del Propietario FR Manuel du Propriétaire...
English Contents 1 Notice 5 Making more use with your TV ..................................Displaying the Main Menu 2 Important Picture ........................ Sound Positioning the TV Setup Regulatory Notices Autoprogram Environmental Care Channel list Preparing to Move/Ship the Unit Add channels Antenna Confirmation 3 Getting Started ....................
Page 3
Register Online at www.emersonaudiovideo.com today to get the very most from your purchase. Registering your model with Emerson makes you eligible for all of the valuable benefits listed below, so don't miss out. Register Online at www.emersonaudiovideo.com to ensure: *Product Safety Notification...
Brand Model # dimension • Install the Wall Mount Bracket on a sturdy vertical wall. M6 x 0.787" LF501EM5F SANUS PLA50B • If installed onto a ceiling or slanted wall, the TV and Wall (20mm) Mount Bracket may fall which could result in a severe injury.
RFI / EMI connector hoods to maintain compliance with FCC Rules and Regulations. EMERSON and the G-CLEF logo are registered trademarks of Emerson Radio Corp. in the U.S. and Canada, used under license by Canadian notice Funai Electric Co., Ltd. and Funai Corporation, Inc.
Unit may increase slightly. This is not a End of Life Directives malfunction. Emerson pays a lot of attention to produce environmental-friendly • Avoid a place with drastic temperature changes. products in green focal areas. Your new TV contains materials which •...
Child lock ● Model Quantity Size This feature allows you to Block children’s access to inappropriate Programs. LF501EM5F M4 x 0.472”(12mm) Closed Caption decoder ● Built-in Closed Caption decoder displays text for Closed Caption supported Programs. MTS / SAP tuner ●...
English Stand Assembly Installing the Remote Control Batteries × Slide the battery cover off the back of the Remote Control. Insert 2 Batteries (AAA, 1.5V). Be sure the + and – ends of the Batteries line up with the markings inside the case. Slide the cover back into position.
English Remote Control a B (POWER) Turns the TV On from Standby or Off to Standby. b PIC/SOUND MODE Optimizes Picture and Sound quality. c FREEZE Freezes Screen image for 5 minutes. d 0 - 9 (NUMBER keys) Used to enter a Channel / Program number. •...
English a VOL J / K Control Panel Adjusts the Volume. VOL J : Volume Down VOL K : Volume Up In the Menu screen, moves the Cursor Left ( J ) / Right ( K ). b CH H / I Selects a Channel in the Memorized Channel Ring (Low to High or * Keys on Rear.Control High to Low).
English If connecting a Set-top Box through Component Video Input Connecting the Antenna, Cable or Satellite If the TV is connected to a Cable / Satellite Set-top Box via Component Be sure your Antenna or another Device is connected properly before Video Input, make sure you select the correct Component Video Source plugging in the AC Power Cord.
Video and Audio signals are combined in one cable. You must use HDMI for full high-definition Video and to enable fun-Link (HDMI CEC). Note(s) Emerson HDMI supports HDCP (High-bandwidth Digital Contents Protection). ● HDCP is a form of Digital Rights Management that protects high definition content in Blu- ray Discs or DVDs.
English Connecting your Devices Component Analog Video Connection Component Analog Video Connection offers Better Picture quality for Video Devices connected to the Unit. If you connect to the Unit’s Component Video (Y/Pb/Pr) Input jacks, HDMI Digital Connection connect Analog Audio Cables to the Analog Audio (L/R) Input jacks. HDMI Connection offers the Highest Picture quality.
English PC Connection Note(s) Please purchase the VGA cable or HDMI-DVI Conversion Cable that has a ferrite core. HDMI Connection ● The following operations may reduce noise. ● This Unit can be connected to your PC that has an HDMI terminal. Attach a ferrite core to the AC Power Cord of your PC.
English These Operations are accessible by Remote Control. Use H I to select the desired Location setting, then press OK. Some may also be accessible by the Main Unit's Control Panel. Home is the ENERGY STARN qualified setting. Initial Setup Initial setup Retail This section will guide you through the Unit’s Initial setting which includes...
English 4 Use your TV Switching Channels Switching on your TV and putting it in Standby mode * Key on Rear Remote Control * Key on Rear Remote Control To Turn the TV On from Standby or Off to Standby Press B on the Rear panel or the Remote Control.
English Watching Channels from an External Device Sleep Timer Switching Each Input Mode can easily switch with the Remote Control Sleep Timer can set the Unit to go into Standby mode after an incremental between TV (DTV or Analog TV) and External Devices when they are period of time.
English For 4:3 Video signal Changing Picture Format Display Modes can be Selected when your TV receives a 16:9 or 4:3 Video Signal. Three types of Display Modes can be Selected for a PC Input Signal. Normal 16:9 Movie expand Press PICTURE SIZE A Repeatedly to Switch the TV Aspect Ratio.
English TV Screen information You can display the currently selected channel or other information such as the aspect ratio on the TV screen. In the Digital mode, the detailed broadcasting information for the current off the air channel, such as Program title, are displayed. Press INFO.
English 5 Making more use with your TV Use H I to select the desired Menu and an item, then press OK or use H I J K to determine the setting. This section describes the overview of the Main Menu displayed when you press MENU.
English You can set a Particular Picture Quality using Advanced Picture ● settings. Before you begin: Color alignment Normal Picture You must set Home in Location. L p. 30 Noise reduction Sound Otherwise, personalized Picture and Sound settings will not be Ambient light sensor Setup memorized after the Unit goes into Standby Mode.
English You can select Audio Output through a Digital Audio Output connector. Sound to Output Multichannel Signals (When the Audio of the Content Before you begin: Multichannel Digital output is PCM, it will be Output in PCM format You must set Location to Home. L p. 30 even if Multichannel is selected.) Otherwise, personalized Picture and Sound settings will not be to Output PCM format.
English Setup Autoprogram Before you begin: Please wait while the system is scanning for Make sure the Unit is connected to Antenna or Cable. channels. Auto programming may take more than 20 minutes Press MENU and use H I to select Setup, then press OK. to complete.
English Features Add channels This function lets you add the off the air Analog TV or Analog Cable Display Setup using Home Menu and use H I to select Features, channels that were not added by the Autoprogram due to reception then press OK.
Page 25
English Note(s) Cable / NTSC (Analog) TV Operation Closed Caption will NOT be displayed when you are using an HDMI Connection. ● The primary Closed Captions and Digital caption service that you can switch differs depending on the broadcast description. ●...
English Channel lock Child and Ratings Lock Particular Channels or External Input modes can be invisible in this You can prevent your children from watching certain Programs or certain function. Channels by locking the TV Controls and by using Ratings. Use H I to Select Channel lock, then press OK.
English To set the Sub ratings Setting US Movie and TV Ratings As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the Sub US Movie Ratings Lock is the Rating System created by MPAA. ratings to Block Specific Elements within programs. To set the Sub ratings, US TV Ratings Lock has Controlled Access to Individual Programs based follow the step below.
English Canadian English or Canadian French Ratings PC settings You can select the Rating for Canadian English or Canadian French This function lets you adjust the PC screen position, clock and phase broadcasting. during PC Input. Use H I to Select Canadian English rating or Canadian French Use J K to adjust Clock setting to stabilize the PC screen and Phase rating, then press OK.
English Device list fun-Link (HDMI CEC) This function lets you see the product model number or name of This function allows you to operate the linked functions between our Connected Devices. brand Devices with a fun-Link feature and this Unit connecting through Use H I to select the desired fun-Link devices listed on the TV screen, an HDMI cable.
English Language Setting your Location to Home You can set the Location of your TV to Home or Retail. Choosing Home Press MENU and use H I to select Language, then press OK. gives you full flexibility to change predefined settings for Picture and Sound.
English Picture (JPEG) Use H I to select the desired file, then press OK. Your TV is fitted with a USB Connection that enables you to view JPEG photos or watch Motion JPEG files stored on a USB Memory Stick. Picture Connect the USB Memory Stick to the USB terminal on the side of Image1.jpg...
Note(s) The TV starts up with the New Software. ● For further assistance, please contact the Call Center. Only FAT / DOS-formatted portable memory is supported. ● Use only Software Upgrades that can be found on the Emerson website. ●...
English 7 Useful tips Question Answer Check the Antenna or Cable Connection to the Main Unit. ● Check the Batteries on the Remote Control. ● Re-insert the Batteries with their Polarities (+/–) as indicated. ● Check if there is an obstacle between the infrared sensor window and the Remote Control. ●...
You see a Distorted Picture or Hear an Unusual Sound. (Analog TV - Universal Remote Control does not work properly. NTSC signal) Refer to the user manual of the Universal Remote Control for the Emerson ● You may be getting interference from electrical appliances, automobiles, ●...
English 8 Information Glossary Maintenance Analog TV (NTSC) Cabinet Cleaning Acronym that stands for National Television Systems Committee and the Wipe the front panel and other exterior surfaces of the Unit with a soft ● name of Analog broadcasting standards. cloth.
English 10 Warranty LIMITED WARRANTY NINETY (90) DAY LABOR / ONE (1) YEAR PARTS WARRANTY COVERAGE: This warranty does not apply (a) to damage caused by accident, This warranty obligation is limited to the terms as set forth abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than below.
Page 38
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., MOONACHIE, NEW JERSEY, U.S.A. FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501 A3AUQUH ★★★★★...