Siemens 7NG3092-8KU Operating Instructions Manual

Siemens 7NG3092-8KU Operating Instructions Manual

Sitrans accessories modem and siprom t for sitrans th100/th200/tr200/tf200/tf

Quick Links

Modem and SIPROM T for SITRANS
TH100/TH200/TR200/TF200/TF with
TH200
SITRANS
Accessories
Modem and SIPROM T for
SITRANS
TH100/TH200/TR200/TF200/TF
Operating Instructions
7NG3092-8KU, 7NG3092-8KM
06/2014
A5E00468983-04
___________________
Introduction
___________________
General safety notes
___________________
Description
___________________
Installing
___________________
Commissioning
___________________
Operating SIPROM T
___________________
Troubleshooting/
Maintenance
___________________
Technical data
___________________
Certificates
1
2
3
4
5
6
7
8
9
Table of Contents
loading

Summary of Contents for Siemens 7NG3092-8KU

  • Page 1 TH100/TH200/TR200/TF200/TF with ___________________ General safety notes TH200 ___________________ Description SITRANS ___________________ Installing Accessories ___________________ Modem and SIPROM T for Commissioning SITRANS ___________________ TH100/TH200/TR200/TF200/TF Operating SIPROM T Operating Instructions ___________________ Troubleshooting/ Maintenance ___________________ Technical data ___________________ Certificates 7NG3092-8KU, 7NG3092-8KM 06/2014 A5E00468983-04...
  • Page 2: Legal Information

    Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 3: Table Of Contents

    Description .............................. 9 Applications ............................ 9 Product features ..........................9 Scope of delivery.......................... 10 3.3.1 Modem with a USB connection (7NG3092-8KU) ................. 10 3.3.2 Modem with a RS232 connection (7NG3092-8KM)..............10 Installing ............................... 11 Hardware and software requirements ..................11 Installing the SIPROM T parameterization software ..............
  • Page 4 Table of contents Troubleshooting/Maintenance ....................... 41 Troubleshooting .......................... 41 Maintenance ..........................41 Technical data ............................43 Certificates ............................45 Index ..............................47 Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 5: Introduction

    The Programming Manual forms a part of the supplied CD and is also available on the Siemens homepage on the Internet. On the enclosed CD, you will find an extract of the catalog FI 01 "Field devices for process automation" with the current ordering data. The complete catalog FI 01 is available on the Internet.
  • Page 6 Introduction 1.2 Further information Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 7: General Safety Notes

    General safety notes General information This device left the factory free from safety problems. In order to maintain this status and to ensure safe operation of the device, please observe the safety information and warnings contained in these instructions. Correct usage WARNING Use and operation only in secure area under laboratory conditions The SIPROM T modem can only be operated and configured together with the...
  • Page 8: Qualified Personnel

    General safety notes 2.3 Qualified Personnel Qualified Personnel "Qualified personnel" means those who are familiar with the installation, mounting, commissioning and operation of the product. They must have the following, appropriate qualifications for their activities: ● Training or instruction/authorization in operating and maintaining devices and systems according to the safety regulations for electrical circuits.
  • Page 9: Description

    ● Electrical isolation between the PC and the transmitter to be parameterized ● Adherence to the EEx directive for the connected transmitter ● Feeding power to the USB modem (order number 7NG3092-8KU) using the power supply directly from the USB port of the PC.
  • Page 10: Scope Of Delivery

    Description 3.3 Scope of delivery Scope of delivery 3.3.1 Modem with a USB connection (7NG3092-8KU) The following is supplied with your modem for SITRANS TH100/TH200/TR200/TF200/TF with TH200 with a USB connection: ● Warnings ● Product brief in German and English "USB-Modem - Installation Instructions (brief)"...
  • Page 11: Installing

    The enclosed mini DVD contains the SIPROM T parameterization software. You can also download the parameterization software from the Internet free of charge. Refer to SIPROM T software package on the Internet (http://www.siemens.com/processinstrumentation/downloads). Procedure Install the SIPROM T parameterization software as specified below: 1.
  • Page 12: Windows Xp And Earlier

    PC when installation of the parameterization software has been completed. Result After successful installation, a new program group with the name "Siemens Process Instruments" is created in your Windows start menu. The USB driver that you require for the USB modem is also pre-installed.
  • Page 13 Prepare for the installation of the USB modems as specified below: 1. Connect the USB modem to a free USB port of your computer using the cable provided. The 7NG3092-8KU modem is compatible with USB 1.x and USB 2.0. After plugging in, Windows opens the Hardware wizard automatically: 2.
  • Page 14 Installing 4.3 Windows XP and earlier 5. Click "Browse". The following window opens: 6. Select the directory in which the SIPROM T parameterization software and the USB drive were installed. The USB driver is installed in the 'C:\Program Files\SIPROM T\USB' sub-directory in case of a standard installation of the SIPROM T parameterization software.
  • Page 15 Installing 4.3 Windows XP and earlier 8. Click "Next". The USB driver is being installed. The following window opens: 9. Click "Finish". Result This completes initial preparations for the installation of the USB driver. Now go to step 2 of the installation process.
  • Page 16: Step 2: Installation Of The Usb Modem

    Installing 4.3 Windows XP and earlier 4.3.1.2 Step 2: Installation of the USB modem Prerequisites After executing step 1 of the installation, the Hardware wizard should open again automatically. The following window appears: Procedure Continue with the installation as specified below: 1.
  • Page 17 Installing 4.3 Windows XP and earlier 3. Check whether all settings that you have made in "Step 1: Preparing for installation" have been accepted. If not, you have to make these settings afresh as described in "Step 1: Preparing for installation". 4.
  • Page 18 Installing 4.3 Windows XP and earlier 7. Double-click the "System" entry. The following window opens: 8. Click "Device Manager" in the "Hardware" tab. Windows calls up the Device Manager. The following window opens: Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 19 Installing 4.3 Windows XP and earlier 9. Double-click the "Ports (COM & LPT)" folder. All parallel (LPT) and serial ports (COM and USB) of your computer are displayed in this folder. The newly installed USB port has the name "USB Serial Port (COMx)", where x indicates the number of this COM port. It is COM3 in our example: 10.Note the number of the COM port;...
  • Page 20 Installing 4.3 Windows XP and earlier 11.If the COM port number is not in the range from 1 to 8, double-click the marked line in "Device Manager". The following window opens: 12.Click the "Port Settings" tab. The following window opens: Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 21: Step 3: Entries In The Siprom T Parameterization Software

    Installing 4.3 Windows XP and earlier 13.Click "Advanced..." The following window opens: 14.Select a matching port number in the "COM Port Number" field. COM numbers with the "in use" comment have already been occupied and can no longer be used. If all COM ports are occupied, one serial port must be disabled to be able to install the USB driver.
  • Page 22 The COM port number selected by you must be entered in the SIPROM T parameterization software. This is done as specified below: 1. Start the SIPROM T parameterization software via "Start -> Programs -> Siemens Process Instruments -> SIPROM T". The application is started and the following window opens: 2.
  • Page 23: Uninstalling Usb Drivers

    Installing 4.3 Windows XP and earlier 3. Select the COM port number that you have noted. This is the COM port that was displayed in "Device Manager". It was "COM3" (COM port 3) in our example. 4. Confirm the setting with "OK." Result The installation of the USB driver is completed successfully.
  • Page 24 Installing 4.3 Windows XP and earlier Procedure Uninstall the USB driver as specified below: 1. Go to "C:\Program Files\SIPROM T\USB" in Windows Explorer if you have selected standard installation. If not, go to the directory in Windows Explorer where you have installed the USB driver: 2.
  • Page 25 Installing 4.3 Windows XP and earlier 3. Double-click "FTDIUNIN.EXE". The following window opens: 4. Click "Continue." The following window opens: 5. Click "Finish". Result The USB driver is uninstalled. SIPROM T can no longer be operated with the USB modem. The USB driver files however remain on your hard disk.
  • Page 26: Windows 7 And Higher

    Installing 4.4 Windows 7 and higher Windows 7 and higher 4.4.1 Installing USB drivers Procedure 1. Open the SIPROM T Software directory. 2. Open the "USB/Win7&Higher" folder. 3. Right-click on the "CDM20830_Setup.exe" file and select "Execute as administrator". The following window opens: Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 27 Installing 4.4 Windows 7 and higher 4. Click "Extract". The following window opens: Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 28 Installing 4.4 Windows 7 and higher 5. Click "Next". The USB driver is installed. The following window opens: 6. Click "Finish". 7. Check whether the system has installed the correct COM port for the SIPROM T parameterization software. To do this, proceed as described in steps 6 to 11 in chapter "Step 2: Installation of the USB modem (Page 16)".
  • Page 29: Uninstalling Usb Drivers

    Installing 4.4 Windows 7 and higher 4.4.2 Uninstalling USB drivers Introduction You can uninstall the USB driver manually if you do not wish to continue using the SIPROM T parameterization software in combination with the USB modem. Note This action uninstalls only the USB driver and not the SIPROM T software. The SIPROM T software can be used with the RS232 modem after uninstalling the USB driver.
  • Page 30 Installing 4.4 Windows 7 and higher 4. Select "Uninstall" from the shortcut menu. The following window opens: 5. Select the option box for "Delete driver software for this device". 6. Click "OK". 7. Select "USB Serial Converter" under "Universal Serial Bus controllers" in the Windows Device Manager.
  • Page 31 Installing 4.4 Windows 7 and higher 9. Select "Uninstall" from the shortcut menu. The following window opens. 10.Select the option box for "Delete driver software for this device". 11.Click "OK". Result The associated registration entry to the USB modem is deleted. Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 32 Installing 4.4 Windows 7 and higher Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 33: Commissioning

    Commissioning Safety notes for commissioning WARNING You must only use the 6 V power adapter provided with the device for supplying power to the RS232 modem. Connect the modem only to the prescribed SITRANS TH100/TH200/TR200/TF200/TF with TH200 transmitter. Only use the connecting cable provided with the modem for connecting the modem to the PC.
  • Page 34: Commissioning The Modem

    Commissioning 5.2 Commissioning the modem Note If you are using the USB modem for parameterization of SITRANS TH100/TH200/TR200/TF200/TF with TH200, do not disconnect the USB connector from the PC or the modem during the parameterization process. Note RF interference The MODEM is a class A device. This device may emit RF interference in residential areas. In this case, you need to take appropriate measures.
  • Page 35 Commissioning 5.2 Commissioning the modem Parameterization via the USB modem Parameterization via the RS232 modem Note USB modem versions: Insert the USB "B" connector into the jack, labelled "USB", on your modem. Connect the USB "A" connector to a free USB port of your PC. Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 36: Meaning Of Leds On The Modem

    Commissioning 5.3 Meaning of LEDs on the modem Meaning of LEDs on the modem LEDs on the modems for the SITRANS TH100/TH200/TR200/TF200/TF with TH200 parameterization software have the following meaning: Name Color Meaning Power Green Continuous For the USB modem: Illuminates when the modem is connected to the USB port of the PC and the operating system of your PC is in the normal mode.
  • Page 37: Operating Siprom T

    Operating SIPROM T Introduction This section describes the most important menu items in brief. Please refer to the online help of the SIPROM T parameterization software regarding further notes for operating this software. You will find the technical details regarding the sensor characteristics of SITRANS TH100/TH200/TR200/TF200/TF with TH200 in the corresponding operating instructions.
  • Page 38 Operating SIPROM T Procedure Start the SIPROM T programming software via "Start -> Programs -> Siemens Process Instruments -> SIPROM T". The splash screen of SIPROM T appears while the application is starting. The following window opens as soon as the application is loaded: Extras ->...
  • Page 39 Operating SIPROM T Extras -> Settings -> Language Select the language that SIPROM T should use to communicate with you. Devices -> Load in the device This menu is used for transferring the current table data from SIPROM T to SITRANS TH100/TH200/TR200/TF200/TF with TH200.
  • Page 40 Operating SIPROM T Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 41: Troubleshooting/Maintenance

    Troubleshooting/Maintenance Troubleshooting Explanations for troubleshooting minor faults are given below. Cause of error Remedy The Power LED does not illuminate. For the USB modem: The USB cable is not Connect the USB cable. connected. For the RS232 modem: Power adapter is not Connect the power adapter and check.
  • Page 42 Troubleshooting/Maintenance 7.2 Maintenance Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 43: Technical Data

    Technical data Modem for SITRANS TH100/TH200/TR200/TF200/TF with TH200 including SIPROM T parameterization software Power supply (relevant only for the RS232 version) Supply of the power adapter (power adapter is AC 90 ... 265 V, 50/60 Hz, max 6 W included in the scope of delivery) USB port (relevant only for the USB version) USB version USB 1.1, compatible with USB 2.0...
  • Page 44 Technical data Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 45: Certificates

    Certificates You will find these certificates on the enclosed CD and on the Internet. See also Certificates (http://www.siemens.com/processinstrumentation/certificates) Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 46 Certificates Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...
  • Page 47: Index

    RS232 modem Scope of delivery, 10 Hardware requirements, 11 Scope of delivery RS232 modem, 10 USB modem, 10 Installation Siemens Regional Office, 5 SIPROM T parameterization software, 11 SIPROM T USB modem, 13 Operation, 37 Installing Software requirements, 11 USB driver, 26...
  • Page 48 Index Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200 Operating Instructions, 06/2014, A5E00468983-04...

This manual is also suitable for:

7ng3092-8km

Table of Contents