Fujitsu stylistic q616 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Tablet
  5. stylistic q616
  6. Operating manual

Fujitsu stylistic q616 Operating Manual

Hide thumbs Also See for stylistic q616:
Table of Contents

Quick Links

System
Operating Manual
FUJITSU Tablet STYLISTIC Q616
Table of Contents
loading

Related Manuals for Fujitsu stylistic q616

Summary of Contents for Fujitsu stylistic q616

  • Page 1 System Operating Manual FUJITSU Tablet STYLISTIC Q616...
  • Page 2 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "[email protected]" Copyright © 2016 Fujitsu America, Inc. All rights reserved FPC58-3269-02...
  • Page 3 FUJITSU Tablet STYLISTIC Q616 Operating Manual Declarations of conformity Fujitsu Contact Information Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC (optional) Security functions Connecting external devices Settings in BIOS Setup Utility...
  • Page 6 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.

  • Page 7: Table Of Contents

    Fujitsu Contact Information ........
  • Page 8 Connecting a microphone or other audio input devices ....... . . 68 Fujitsu...
  • Page 9 UL Notice ................88 Fujitsu...
  • Page 10 Index ................. . 107 Fujitsu...

  • Page 11: Declarations Of Conformity

    Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000 hereby declares that the product Basic model configuration: STYLISTIC Q616 meets the requirements of Part 15 of the FCC provisions. This device meets the requirements of Part 15 of the FCC provisions. Preparation for use is subject to the following two conditions: (1) This device must not cause any interference, and (2) this device must accept all interference, including interference that could result in undesirable operation.

  • Page 12: Fujitsu Contact Information

    Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 7 or or Windows 8/8.1 operating system, you will need to go to the Support Site to download the...

  • Page 13: Notational Conventions

    Fujitsu Contact Information Notational conventions Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

  • Page 14: Ports And Controls

    Front 1 = Touchscreen 6 = Mechanical mounting for keyboard cover / cradle 2 = Webcam LED 7 = Docking port 3 = Webcam 8 = Windows button 4 = Ambient light sensor 5 = Power-on indicator Fujitsu...
  • Page 15 2 = Speaker 7 = USB port (USB 2.0) 3 = Shortcut button 8 = USB port (USB 3.0) 4 = Volume Down button 9 = Stylus slot 5 = Volume Up button 10 = Eyelet for stylus cord Fujitsu...
  • Page 16 Ports and controls Rear 1 = Smart Card reader (configuration-dependent) 5 = NFC (Near Field Communication) (configuration dependent) 2 = Webcam LED 6 = Fingerprint sensor 3 = Webcam 4 = Camera light Fujitsu...

  • Page 17: Important Notes

    This Tablet PC complies with the relevant safety regulations for data processing equipment. If you have questions as to whether you can set up the Tablet PC in the intended environment, please contact your sales outlet or our hotline/service desk. Fujitsu...

  • Page 18: Additional Safety Notes For Devices With Wireless Components

    The energy efficiency is increased and environmental pollution is reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the available energy-saving functions as described in chapter "Using the energy saving functions", Page Fujitsu...

  • Page 19: Traveling With Your Tablet Pc

    Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia United Kingdom, Ireland, Malaya, Singapore, parts of Africa China, Australia, New Zealand Fujitsu...

  • Page 20: Transporting The Tablet Pc

    Tablet PC and cause a malfunction. Do not continue to use the Tablet PC. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at: "http://www.fujitsu.com/us/support/"). Fujitsu...

  • Page 21: Cleaning With Disinfectant Wipes

    Before cleaning, please test the disinfectant wipe on a small area of the Tablet PC. Some medical disinfectant wipes may leave residue on the Tablet PC which is difficult to remove again, or they may dry out quickly. Therefore dispose of the wipes after one single use and do not reuse them. Fujitsu...

  • Page 22: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need to reuse the packaging in the future, for example if you need to ship your device. Fujitsu...

  • Page 23: Choose A Location

    ► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 24: Switching On The Device For The First Time

    ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. ► During the installation process, follow the on-screen instructions. You can find information and help on the Windows operating system functions online at "http://windows.microsoft.com". Fujitsu...

  • Page 25: Installing Bonus Apps

    There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications. Fujitsu...

  • Page 26: Working With The Tablet Pc

    "Connecting external devices", Page Please refer to the notes in the chapter "Important notes", Page Status indicators Statusindicators Symbols The status indicators (1, 2, 3) provide information about the statuses of the power supply, the rechargeable batteries and the wireless components. Fujitsu...
  • Page 27 Wake On Wireless LAN is activated while the Tablet PC is in Sleep mode or Save-to-Disk mode, or while the Tablet PC is switched off. • The indicator is not lit up: The wireless components are switched off. Fujitsu...

  • Page 28: Switching The Tablet Pc On

    Panel -) Power Options -Choose what the power button does If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 29: Switching The Tablet Pc Off

    Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish, Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian. On Windows you can set the required language under Control Panel – Time, Language and Region – Language. Fujitsu...

  • Page 30: Touchscreen

    In the settings there are profiles saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired. These settings do not just affect the screen settings on the Tablet PC, but also on external monitors that are connected. Fujitsu...

  • Page 31: Using Fingers

    finger-based operation. Do not use the calibration tool for the stylus to calibrate finger-based operation. Operating system Menu Windows 10 To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...

  • Page 32: Actions With One Finger

    ► Tap your finger on the desired item. mouse button) Keep your fingertip pressed against the touchscreen. The context menu appears. Moving the cursor ► Position one finger on the touchscreen and move your fingers in the desired direction. Fujitsu...

  • Page 33: Actions Using Two Fingers

    ► Place two fingers on the touchscreen. ► Move the fingers up to scroll up. ► Move the fingers down to scroll down. Rotating ► Position your thumb on the touchscreen and rotate the image clockwise or anticlockwise using your index finger. Fujitsu...
  • Page 34 ► Put two fingers on the touchscreen and move them together to decrease the size of the view. Lock context-sensitive menus ► Use two fingers to tap twice in quick succession on the touchscreen. Fujitsu...

  • Page 35: Using The Stylus

    The screen responds to entries made with the tip of the finger or the stylus when the tip of the finger or the stylus directly touches the screen. You can use the stylus to perform almost all functions for which you would otherwise use a mouse. Fujitsu...

  • Page 36: Stylus Location

    (flat part of the stylus points towards the bottom of the Tablet PC). On delivery, the stylus (1) is located in the stylus slot: Adjusting the stylus Operating system Menu Windows 10 Under System Control - Hardware and Sound - Pen and Touch you can make various settings for the stylus. Fujitsu...

  • Page 37: Calibrating The Stylus

    To prevent accidentally dropping or losing the stylus, you should secure it with the optional stylus tether. ► Attach one end of the stylus cord to the stylus and the other end of the stylus cord to the Tablet PC. Fujitsu...

  • Page 38: Replacing The Stylus Tip

    ► Replace the tip with one of the new tips that were supplied with your stylus. Insert the flat end of the tip into the barrel and exerting gentle pressure, push it in until it is firmly in place. If the tip is worn or damaged, discard it. Fujitsu...

  • Page 39: Tablet Buttons

    Volume Down button Decrease volume Volume Up button Increase volume If the Windows button on the Tablet PC is pressed in combination with the ON/OFF button (4), this is equivalent to pressing the Ctrl key combination on a keyboard. Fujitsu...

  • Page 40: Webcam

    five minutes of hearing the warning alarm, your Tablet PC will switch off automatically. Monitoring the battery state of charge Battery battery charge meter A battery symbol for monitoring the battery capacity is displayed in the system bar / status indicator. The battery symbol shows you the battery charge. Fujitsu...

  • Page 41: Using The Energy Saving Functions

    ► Set the energy saving functions in your Control Panel. The recommended settings for the Windows energy saving functions are predefined as "Fujitsu EcoSettings" in the Power Options of the Control Panel and can be displayed there.

  • Page 42: Inserting The Memory Card

    ► Press the edge of the memory card so that the memory card jumps (2) slightly out of the slot (a). ► Pull the memory card out of the slot (a) in the direction of the arrow (3). ► Close the slot cover. Fujitsu...

  • Page 43: Sim Card

    ► Remove the SIM card carrier from its location (2). ► Insert the SIM card (3) as shown on the SIM card carrier. ► Push the SIM card carrier back into its location (4). ► Close the slot cover. Fujitsu...

  • Page 44: Removing A Sim Card

    ► Close the slot cover. Wireless LAN/Bluetooth/4G/LTE/NFC wireless components The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off The wireless components are switched on and off using the appropriate functions of the operating system.

  • Page 45: Access Via Umts

    A mobile end-device (e.g. cellular phone with Bluetooth or cable connection) Access via Wireless WAN You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer. If you have ordered a Wireless WAN module, your device will already be prepared when you receive it.

  • Page 46: Ethernet And Lan (Only With Cradle)

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Whether or not your device has this function depends on the chosen equipment level. Fujitsu...

  • Page 47: Accessories For Your Tablet Pc (Optional)

    The following accessories are available for your Tablet PC: • Cradle for charging the Tablet PC and with additional ports • Keyboard cover • Shoulder strap • Folio cover • Protective TPU cover with kickstand and handstrap The following sections provide more information on handling the accessories. Fujitsu...

  • Page 48: Your Cradle (Optional)

    3 = USB port 3.0 9 = HDMI port 4 = USB port 3.0 10 = LAN port 5 = USB port 3.0 11 = Security Lock device 6 = Microphone port 12 = DC jack socket (DC IN) Fujitsu...

  • Page 49: Setting Up The Cradle

    Cradle ► Remove the AC plug of the AC adapter from the power outlet. ► Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC. Fujitsu...
  • Page 50 ► Plug the AC adapter cable into the DC jack (DC IN) on the cradle (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4). Fujitsu...

  • Page 51: Disconnecting The Tablet Pc From The Cradle

    ► Press the slide-out button in the direction of the arrow (1) until it firmly remains in pressed position (red marking visible). ► While holding down the lower part of the cradle, lift the Tablet PC off the cradle in the direction of the arrow (2). Fujitsu...

  • Page 52: Keyboard Cover (Optional)

    4 = Caps Lock indicator (to switch capitalization function on and off) 2 = Docking port for the Tablet PC 5 = Scroll Lock indicator (function dependent 3 = Num Lock indicator (to switch virtual on the application program) numeric keypad on and off) Fujitsu...

  • Page 53: Connecting The Tablet Pc To The Keyboard Cover

    (1) until you feel it engage with the plug. ► Connect the AC adapter cable to the DC input connector (DC IN) of the Tablet PC (2). ► Connect the AC cable to the AC adapter (3). ► Plug the AC cable into the power outlet (4). Fujitsu...

  • Page 54: Separating The Tablet Pc From The Keyboard Cover

    ► Press the slide-out button down (1) until it remains in the pressed position (red marking visible). ► Lift the Tablet PC away from the keyboard cover in the direction of the arrow (2). Fujitsu...

  • Page 55: Shoulder Strap (Optional)

    Neither put the folio cover in direct sunlight nor expose it to high temperature or humidity. ► Position the Tablet PC on the folio cover as shown. The following illustration shows you the many ways in which the folio cover can be used: Fujitsu...
  • Page 56 Accessories for your Tablet PC (optional) Fujitsu...

  • Page 57: Protective Tpu Cover With Kickstand And Handstrap

    TPU cover. The keyboard docking station and/or tablet could be damaged. • Keep the TPU cover away from fire or heaters. • Avoid exposing the TPU cover to direct sunlight, high temperatures or humidity. ► Open the TPU cover (1). Fujitsu...
  • Page 58 Windows key (a) and webcam (b) are located in the positions shown, relative to the TPU cover. ► Open the TPU cover (1). The following illustration shows you the many ways in which the TPU cover can be used: Fujitsu...
  • Page 59 Accessories for your Tablet PC (optional) The following illustration shows you the way in which the TPU cover can be used: If required, secure the optional shoulder strap at the four attachment points (1,2,3 and 4). Fujitsu...

  • Page 60: Security Functions

    The fingerprint sensor can record the image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► Install the fingerprint software to be able to use the fingerprint sensor (1). Fujitsu...

  • Page 61: Using The Security Lock

    Your password can be up to 32 characters long and can contain letters, numbers and special characters. A distinction is made between upper and lower case. When using special characters, please note that these are dependent on the country-specific variant of the keyboard used. Fujitsu...

  • Page 62: Protecting Bios Setup Utility (Supervisor Password And User Password)

    You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Start the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as when assigning a password. Fujitsu...

  • Page 63: Password Protection For Booting The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The Tablet PC reboots. The system is no longer password-protected. Fujitsu...

  • Page 64: Password Protection For The Hard Disk

    ► After the request, press the Enter key three times. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC reboots and there is no longer any password protection for this hard disk. Fujitsu...

  • Page 65: Smartcard Reader (Optional)

    Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. ► Push the Smart Card into the Smart Card reader (1) with the chip facing the rear of the Tablet PC. Fujitsu...

  • Page 66: Trusted Platform Module - Tpm (Device Dependent)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select the entry Disabled to disable the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC is rebooted and the TPM is disabled. Fujitsu...

  • Page 67: Connecting External Devices

    Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can find the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. Fujitsu...

  • Page 68: Hdmi Port (Cradle Only)

    You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touchscreen", Page You can display the same image on the external monitor and on the LCD screen of the Tablet PC at the same time. Fujitsu...

  • Page 69: Connecting Usb Devices

    ► Tap the symbol for safe removal of the hardware. ► Select the device you wish to shut down and remove. ► Tap OK. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 70: Connecting External Audio Devices

    MP3 player, CD player or a tape deck to your Tablet PC. ► Connect the audio cable to the external device. ► Connect the audio cable to the combined headphones and microphone port of the Tablet PC or to the microphone port of the cradle (optional). Fujitsu...

  • Page 71: Settings In Bios Setup Utility

    ► Keep the Volume Down button pressed and switch on the Tablet PC. BIOSSetupUtility ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 72: Bios Setup Utility Operation

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the "Enter" key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 73: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save changes and power off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 74: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"...

  • Page 75: Executing A Reset

    ► Note the ID number of your device. The ID number is found on the type rating plate on the back or underside of the casing. ► For further clarification of the problem, contact the Fujitsu Service Desk. When you do this, please have ready the ID number and serial number of your system.

  • Page 76: Battery Indicator Does Not Illuminate

    "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PC’s touchscreen is difficult to read. Touchscreen Touchscreen Cause Troubleshooting Reflected glare ► Move the Tablet PC into a different position. ► Increase the brightness of the screen. Fujitsu...

  • Page 77: The External Monitor Remains Blank

    The cursor does not correctly follow the stylus movements Cause Troubleshooting Stylus incorrectly calibrated. ► Calibrate the stylus as described in chapters "Adjusting the stylus", Page 34 "Calibrating the stylus", Page Fujitsu...

  • Page 78: Stylus Input Not Working

    ► Close the application program or restart malfunction. the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Connect the AC adapter to the Tablet Fujitsu...

  • Page 79: The Printer Does Not Print

    The maximum brightness may have been set ► Reduce the brightness of the screen to for the screen. lower energy consumption: You will find the setting under Control Panel – Hardware and Sounds – Windows Mobility Center. Fujitsu...

  • Page 80: Smart Card Reader Is Not Recognized

    (for a charge). Smart Card lost Cause Troubleshooting Smart Card lost. ► If you work in a network, contact your system administrator, who can boot your Tablet PC with a supervisor Smart Card. Fujitsu...

  • Page 81: Acoustic Warning

    This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs. If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center. Fujitsu...
  • Page 82 System battery is dead - Replace and run SETUP service center. ► Contact your sales outlet or our customer System cache error - Cache disabled service center. ► Contact your sales outlet or our customer System timer error service center. Fujitsu...

  • Page 83: Technical Data

    Weight depending on configuration from 1.71 lbs. (775 g) Input devices Tablet buttons 4 keys Stylus Stylus with a pressure button Slots Memory card slot 1 x microSD SIM card slot 1 x Micro SIM Smart Card slot (device-dependent) Fujitsu...
  • Page 84 Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 41 °F ..95 °F / 5 °C ..35 °C Transport temperature (2K2) 5 °F ..140 °F / –15 °C ..60 °C Fujitsu...

  • Page 85: Screen Resolutions For Integrated Screen And External Screens

    @60Hz 1920x1080 3840x2160 @60Hz @30Hz 1920x1080 1920x1200 @60Hz @60Hz 1920x1080 4096x2160 @60Hz @24Hz 1920x1080 3840x2160 3840x2160 with Cradle @60Hz @30Hz @30Hz 1920x1080 1920x1200 1920x1080 @60Hz @60Hz @60Hz 1920x1080 @60Hz 1920x1080 @60Hz 1920x1080 @60Hz 1920x1080 1920x1080 1920x1080 @60Hz @60Hz @60Hz Fujitsu...

  • Page 86: Wlan Specifications

    Encryption types: WEP, TKIP, AES, WPA 1.0 and WPA 2.0 compliant Encryption key, lengths supported: 64 bits and 128 bits Maximum recommended number of computers 10 units or less to be connected over wireless LAN (during ad hoc connection) Fujitsu...

  • Page 87: Rechargeable Battery

    Technical data Rechargeable battery For information on the batteries used in your device, please see "http://solutions.us.fujitsu.com/www/content/support/contact/index.php". 3-cell lithium polymer battery 3450 mAh Rated voltage 11.1 V Rated capacity 38 Wh AC adapter 65 W for the Tablet PC Technicaldata Rated voltage 19 V Max.

  • Page 88: Keyboard Cover (Optional)

    0.91 lbs. / 420 g Protective TPU cover with kickstand and handstrap Dimensions Width x Depth x Height 12.20 inches x 8.03 inches x 1.38 inches / 310 mm x 204 mm x 35 mm Weight 0.93 lbs. / 420 g Fujitsu...

  • Page 89: Manufacturer's Notes

    Remember – protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations. * To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site "www.shopfujitsu.com"...

  • Page 90: Ul Notice

    For continued protection against risk of fire, replace only with the same type and rating fuse. WARNING: Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instruction. Fujitsu...

  • Page 91: Energy Star Compliance

    To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving benefits: Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.

  • Page 92: Declarations Of Conformity

    This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Fujitsu...

  • Page 93: Fcc Id And Ic Id Label Information

    The FCC ID and IC ID label information is available beneath the removable outer back cover of the Tablet PC. No tools are required, the outer back cover can be removed by carefully unclipping it from the Tablet PC. 1 = Outer back cover 3 = Label 2 = Inner cover Fujitsu...

  • Page 94: Fcc Regulatory Information

    In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Fujitsu...

  • Page 95: Regulatory Information/Disclaimers

    2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Fujitsu...

  • Page 96: Fcc Radio Frequency Exposure Statement

    : (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modification n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.

  • Page 97: Canada, Industry Canada (Ic)

    In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. Fujitsu...

  • Page 98: Avis Pour Le Canada

    (ce qui signifie qu’ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences et/ou des dommages aux appareils de réseau exempts de licence. Fujitsu...

  • Page 99: Appendix

    IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode. • The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption. • The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0. Fujitsu...

  • Page 100: Wireless Lan Modes Using This Device

    That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network. Fujitsu...
  • Page 101 (e.g., file servers, printers, databases). = An optional hub for a wired LAN may ** = ADSL modem, cable modem, or similar be required depending upon the type of access point used. Fujitsu...

  • Page 102: Deactivating/Disconnecting The Wlan Device

    After you have configured your computer, you can connect to an active network by performing the following steps: 1. Click on the WLAN icon in the system tray. 2. Select Connect to a network. 3. Select a network from the list that appears, and click the Connect button. Fujitsu...

  • Page 103: Troubleshooting The Wlan

    Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better sight. Fujitsu...
  • Page 104 LAN device to associate but not authenticate to the wireless network. Incorrect IP address This only applies to networks configuration using static IP addresses. Please contact your network administrator for the correct settings. Fujitsu...

  • Page 105: Image Backup And Recovery Procedures

    It is also important that you create a backup of the content of the C:\Drivers folder on your system to writable media or an external drive. System-specific software drivers are also available for download through the Fujitsu support site. Note: Most of the information below comes from the Microsoft® page "http://windows.microsoft.com/en-us/windows-10/windows-10-recovery-options".
  • Page 106 Fujitsu, you can use it to reinstall Windows. You will need to install additional drivers and applications after reinstalling Windows. To reinstall Windows, follow the steps below: 1. Power on your system. When the Fujitsu logo appears on the screen, press the key. 2. Insert the bootable disc in your DVD drive.
  • Page 107 A message will be displayed during this time stating Please wait while the content is being processed. 6. If the EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue. 7. The Fujitsu Software Auto Installer user interface will be launched providing the ability to auto install the software downloaded from the support site.

  • Page 108: Downloading Driver Updates

    To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view and download the most current drivers, utilities and applications to determine whether you have the latest versions.

  • Page 109: Index

    28 dark touchscreen 74 Date not correct 73 Declarations of conformity 90 Display orientation Making ready to use 21 select 28 Memory card DOC (INDUSTRY CANADA) NOTICES 87 handling 39 inserting 40 removing 40 Mobile operation 17 Ending Fujitsu...
  • Page 110 38 Transport Damage during transportation 20 Transportation 17 Safety information 15 Travel 17 Screen connection Troubleshooting 72 see VGA port 66 Trusted Platform Module 64 Security functions 58 SmartCard 63 SystemLock 63 USB ports 67 Security Lock Fujitsu...
  • Page 111 Index User password Winter time 73 change 60 Wireless components entering 60 Safety notes 16 removing 61 Wireless LAN Safety notes 16 Wrong date/time 73 VGA port 66 Webcam 38 Fujitsu...

Table of Contents