Honeywell KT 74 Pilot's Manual
Hide thumbs Also See for KT 74:
Table of Contents
loading

Summary of Contents for Honeywell KT 74

  • Page 2 Airplane Flight Manual, the information in the Airplane Flight Manual shall take precedence. COPYRIGHT NOTICE © 2013 BendixKing by Honeywell. All rights reserved. Reproduction of this publication or any portion thereof by any means without the express written permission of Honeywell International Inc.
  • Page 3 KT 74 Pilot's Guide KT 74 ADS-B OUT ENABLED MODE S TRANSPONDER PILOT'S GUIDE D201308000036 Title Rev 0 Dec 2013 Page T-1 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 4 Guide Revision Summary This is a new release. Record of Revisions REVISION REVISION NUMBER DATE DEC, 2013 Record of Revisions D201308000036 Page RR 1 Rev 0 Dec 2013 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 5: Table Of Contents

    Configuration Mode ............1-10 1.10 Low Temperature Operation ......... 1-10 2. Appendix ................. 2-1 Acronyms and Abbreviations ........... 2-1 D201308000036 Table of Contents Rev 0 Dec 2013 Page TC 1 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 6 Table 1-1: FUNC Sequence with Squat Switch Input Enabled ..1-7 Table 1-2: FUNC Sequence without Squat Switch Input Enabled .. 1-7 Table of Contents D201308000036 Page TC 2 Rev 0 Dec 2013 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 7: Operation

    The feature-rich KT 74 brings the value, simplicity, reliability and affordability into the cockpit that BendixKing has been trusted for since 1959. The KT 74 is certified to ETSO C112d Class 1 Mode S level 2els, ETSO C166b Class B1S, FAA TSO C112D and TSO C166B. D201308000036...
  • Page 8: Front Panel Controls And Functions

    KT 74 Pilot's Guide FRONT PANEL CONTROLS AND FUNCTIONS Figure 1-1: Front Panel Controls and Functions The KT 74 has the following front panel controls and functions: • See section 1.3. Display: • See section 1.4. Mode Knob: • Push Buttons: See section 1.5.
  • Page 9: Light Sensor

    • Light Sensor If connected to a lighting bus, the KT 74 will adjust the brightness of the front panel lighting based upon the lighting bus input. If no lighting bus input is detected, the KT 74 will automatically control the front panel lighting based on the ambient light sensor.
  • Page 10: Mode Knob

    The mode indicator will read GND. Operation D201308000036 Page 1-4 Rev 0 Dec 2013 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 11: Push Buttons

    The ENT button confirms selection or presented options. The numeric buttons are used to change the squawk code and as part of the data entry selections. D201308000036 Operation Rev 0 Dec 2013 Page-1-5 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 12: Squawk Code Entry

    7700 FUNCTIONS Figure 1-5: Functions The different KT 74 functions are accessed using the FUNC button. The functions displayed vary depending on whether the aircraft is airborne or is on the ground (squat switch or other method of air/ground determination installed) and has the GPS input enabled or not as shown in the following tables.
  • Page 13: Flight Timer

    Timer records the time for which the transponder has been powered on and operating in flight mode – either ON or ALT. D201308000036 Operation Rev 0 Dec 2013 Page-1-7 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 14: Stopwatch

    When altitude monitoring is in use, a small deviation pointer appears adjacent to the altitude display on the transponder. Operation D201308000036 Page 1-8 Rev 0 Dec 2013 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 15: Ads-B Monitor

    Note the FAULT message at the bottom of the screen and pass that information to your avionics maintenance organization. D201308000036 Operation Rev 0 Dec 2013 Page-1-9 © Honeywell International Inc. Do not copy without express permission of Honeywell...
  • Page 16: Configuration Mode

    1.10 LOW TEMPERATURE OPERATION The KT 74 is certified to operate down to -25°C; however under cold operating conditions, the display update rate may be slowed but functional. The KT 74 incorporates an integral heating element in the front panel to automatically raise the temperature around the display.
  • Page 17: Appendix

    Commercial use is strictly prohibited. further information contact [email protected]. D201308000036 Appendix Rev 0 Dec 2013 Page 2-1 © Honeywell International Inc. Do not copy without express permission of Honeywell...

Table of Contents