Sharp LE650U Operation Manual

Sharp LE650U Operation Manual

Aquos liquid crystal television
Table of Contents
Table of Contents
loading

Summary of Contents for Sharp LE650U

  • Page 2: Table Of Contents

    Contents Part Names 6. Enjoying Photo/Music/Video Playback 11. Appendix 1-1. TV (For the UQ, TQ, SQ, EQ, LE650U, C6500U, (Except for UD1U) 11-1. Removing the Stand LE657U and LE642U models) 6-1. Preparation 11-2. Setting the TV on the Wall 1-2. TV (For the UD1U model) 6-2.
  • Page 3: Part Names

    Part Names (Rear) TV (For the UQ, TQ, SQ, EQ, LE650U, C6500U, LE657U and LE642U models) (Front) See page 4-6. See page 4-31. *1 See the Setup Guide. And see page 7-1 for external equipment connection. (Side) See page 8-2 for details on the Audio Select function.
  • Page 4: Tv (For The Ud1U Model)

    Part Names (Rear) TV (For the UD1U model) (Front) See page 4-6. See page 4-31. (Side) *1 See the Setup Guide. And see page 7-1 for external equipment connection. See page 8-2 for details on the Audio Select function. *3 Use HDMI IN 3 to connect ARC-compatible equipment. *4 Connect 4K signals (HDCP2.2) to the HDMI IN 1 terminal.
  • Page 5: Remote Control Unit

    14 2D/3D: UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models: Select between 3D and 2D image viewing. (See pages 5-8 to 5-10 for details.) SQ10U, EQ10U, LE650U C6500U and LE642U models: This can only be used for some functions. (See pages 5-9 to 5-10 for details.) 15 / / / , ENTER: Select a desired item on the screen.
  • Page 6 Part Names 21 FREEZE: Set the still image. Press again to return to normal screen. Remote Control Unit (Continue) (See page 3-4.) 22 AUDIO: Selects the MTS/SAP or the audio mode during multichannel audio broadcasts. (See page 3-8.) 23 ENT: Jumps to a channel after selecting with the 0–9 buttons. 24 FLASHBACK: Return to the previous channel or external input mode.
  • Page 7: Watching Tv

    Watching TV Displaying an External Equipment Image To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. Example 1 Press INPUT. The INPUT list screen displays. 2 Press / to select the input source.
  • Page 8: Initial Installation

    Watching TV Location & Time Initial Installation Make settings for the country, area and time zone where you When you turn on the TV for the first time, it will automatically use the TV. memorize the broadcasting channels available in the region 2 Press / to select "United States", "Canada"...
  • Page 9 Watching TV 5 Press / to select "Home" or "Store". Initial Installation (Continue) Press ENTER to enter the setting. 4 Press / to select the Daylight Savings Time, and then press ENTER. "Auto" is the default selection. Home: "Power Saving" is set to "Advanced", and AV MODE TV Location is set to "STANDARD (ENERGY STAR)*1".
  • Page 10 Watching TV To watch TV, select the input source corresponding to the Initial Installation (Continue) terminal connected to the set-top box. When doing so, you must make the setting to skip "TV". Press to select Antenna & Cable/STB "On", and then press ENTER. Select the type of connection you will use to watch TV.
  • Page 11 Watching TV The Channel search results may include scrambled Initial Installation (Continue) channels or channels that are not viewable in the set area. Press to select "Yes", and then press ENTER to CH Search (Channel search) remove scrambled channels. Channel auto search makes the TV look for all channels viewable in the set area.
  • Page 12 Watching TV Examples of the settings confirmation screen Initial Installation (Continue) When one or more channel is received after "Antenna & Cable" was selected in step 6 and a search was carried Connection using an ETHERNET cable: out. Select "Wired" and press ENTER. Confirm that the TV is properly connected with the router, and then press "Next".
  • Page 13 Watching TV Initial Installation (Continue) NOTE If no channel is found, confirm the type of connection made with your TV and try "Easy Setup" again. (See page 4-13.) To see the list of channels found during Channel search, press INPUT, and then press When "Set-top box"...
  • Page 14: Direct Button Operation

    Direct Button Operation Changing Channels NOTE When selecting a 1-digit channel number, it is not You can change channels in several ways. necessary to press 0 before the number. Method 1 When you enter 0-9 only, channel selection will be made if Using CH on the remote control unit or on the TV.
  • Page 15: Changing Volume

    Direct Button Operation Changing Volume You can change the volume by pressing VOL+/- on the TV or on the remote control unit. To increase the volume, press VOL +. To decrease the volume, press VOL -. Audio status Output Select Output device Fixed Variable...
  • Page 16: Mute

    Direct Button Operation MUTE Mutes the current sound output. Press MUTE. " " will be displayed on the screen for 30 minutes, and the sound is silenced. NOTE Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOL+/- or MUTE. Mute will be canceled after 30 minutes have passed.
  • Page 17: Freeze

    Direct Button Operation FREEZE Allows you to capture and freeze a moving image that you are watching. Press FREEZE. A moving image is captured. Press FREEZE again to cancel the function. NOTE When this function is not available, "No displaying still image available."...
  • Page 18: Flashback

    Direct Button Operation FLASHBACK Press FLASHBACK to switch to the previously tuned channel or previous input mode. Press FLASHBACK again to switch back to the currently tuned channel. NOTE FLASHBACK will not work if no channel has been changed after the TV is turned on. ENG 3-5...
  • Page 19: Smartcentral

    Direct Button Operation SmartCentral Allows you to directly activate various types of applications. 1 Press SmartCentral to display the application window. Press SmartCentral again to display a list of applications by category. 2 Press / (or / ) to select the desired application, and then press ENTER.
  • Page 20: Netflix

    Direct Button Operation NETFLIX Displays the Netflix screen. Press NETFLIX. NOTE If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed. To enjoy Netflix, you need to make: —a broadband Internet connection (See page 9-1.) —settings of Internet Setup...
  • Page 21: Audio

    Direct Button Operation Examples: when receiving MTS and SAP AUDIO STEREO mode: MTS/SAP stereo mode STEREO + SAP mode: The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called MAIN + SAP mode: Multi-channel Television Sound (MTS).
  • Page 22: Sleep Timer

    Direct Button Operation Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP. The remaining time displays when the sleep timer has been set. Each time you press SLEEP, the remaining time switches as shown below.
  • Page 23: Av Mode

    *"x.v.Color" can only be selected when an x.v.Color signal is   input using HDMI IN 1 to 4 terminals. Example: LE650U, LE657U, C6500U, LE642U and UD1U models When using the COMPONENT IN, VIDEO IN 1 or 2 terminals UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U...
  • Page 24 Type". ) (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U and EQ10U models) (See page 4-10.) GAME: Lowers image brightness for easier viewing. (For the LE650U, LE657U, C6500U, LE642U and UD1U models) PC: For PC. USER: Allows the user to customize settings as desired.
  • Page 25: Closed Captions And Digital Closed Captions

    Direct Button Operation 1 Press CC. Closed Captions and Digital Closed This will present the Closed Caption information display. Captions 2 Press CC while the Closed Caption information is still on the screen. Your TV is equipped with an internal Closed Caption decoder. Press repeatedly until you select the desired closed It allows you to view conversations, narration and sound caption service.
  • Page 26 Direct Button Operation Closed Captions and Digital Closed NOTE When "Power Saving" is set to "Standard" or "Advanced", Captions (Continue) the Power Saving leaf icon appears on the channel information window. Examples: See page 4-27 for details of Power Saving settings. In a case where there are two closed caption services See page 4-30 for detailed closed caption settings.
  • Page 27: View Mode

    Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu.
  • Page 28 Direct Button Operation VIEW MODE (Continue) For 4:3 programs Example: Screen size images Side Bar S.Stretch (Smart stretch) Zoom Stretch Suitable for viewing Suitable for viewing wide- This mode is useful for 1.78:1 Suitable for stretching 4:3 conventional 4:3 programs in programs to fill the screen.
  • Page 29 Direct Button Operation VIEW MODE (Continue) For PC Example: Screen size images Input signal Normal Zoom Stretch Dot by Dot Keeps the original For viewing An image fully fills the Detects the resolution aspect ratio in a full widescreen programs. screen.
  • Page 30: On-Screen Display Menu

    On-Screen Display Menu Introduction LCFONT embedded Guide display Item displayed in white This indicates the buttons that can be operated on the This indicates that the item can be selected. displayed screen. The guide display varies depending on Item displayed in gray the menu setting screen.
  • Page 31 LCFONT: This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD screens. ENG 4-2...
  • Page 32: On-Screen Display Menu Operation

    On-Screen Display Menu On-Screen Display Menu Operation Example 1 Press MENU to display the MENU screen. 3 Press MENU to exit. Press to select the desired menu. NOTE Menu options differ in the selected input modes, but the Press / to select a specific adjustment item, and then operating procedures are the same.
  • Page 33: Menu Operation Buttons

    On-Screen Display Menu Using the control panel of the TV Menu Operation Buttons You can also operate the menu with the control panel of the Using the remote control Button operations on the control panel correspond to the ones Use the following buttons on the remote control to operate the on the remote control as shown below.
  • Page 34: Picture Settings

    On-Screen Display Menu Picture Settings AV MODE (Changing Pic.Quality) Example The audio and video settings can be changed to suit the Adjusts the picture to your preference with the following program or input content being watched. picture settings. NOTE NOTE The selectable items vary depending on the input source For operating the on-screen display menu, see page 4-3.
  • Page 35 On-Screen Display Menu Picture Settings (Continue) Automatic Light Sensor(Light Sensor) Example Automatically adjusts the brightness of the screen. THX Setup (For the UQ17U and UD1U models) Off: The brightness is fixed at the value set in "Backlight". Adjust the picture to room illumination or ambient brightness. On: Automatically adjusts.
  • Page 36 "Mode 2", the following modes do not work. 1. Motion enhancement (AquoMotion 960 and 240 Hz) AquoMotion240/120Hz High/120Hz Low/Off 2. Game Type LE650U, C6500U and LE642U models   If you want to use these modes, set Resolution Enhanced 120Hz High/120Hz Low/Off to "Off".
  • Page 37 On-Screen Display Menu Picture Settings (Continue) Color Temp. (Color Temperature) Example For a better white balance, use color temperature correction. Clear Picture Processing (for the UQ17U, TQ15U, High: White with bluish tone SQ17U, SQ15U and SQ10U models) Mid-High: Middle: Reduces jaggies and noise and displays a clear picture. Mid-Low: Processes noise included in broadcast signals to improve picture quality.
  • Page 38 On-Screen Display Menu Picture Settings (Continue) Digital Noise Reduction Example Produces a clearer video image. Active Contrast (Except for UD1U) Auto: Automatically adjusts the level of noise reduction. Automatically adjusts the image contrast according to the High/Middle/Low: You can select a desired level for viewing scene.
  • Page 39 On-Screen Display Menu Picture Settings (Continue) Light Sensor Adjustment Example The brightness level range of the Light Sensor's automatic Lamp Swing Effect (for the UQ17U, TQ15U, SQ17U, adjustments can be set according to your preferences. SQ15U, SQ10U and EQ10U models) The adjustment range of the Light Sensor can be set to a maximum of +16 and a minimum of –16.
  • Page 40: Audio Settings

    On-Screen Display Menu Audio Settings Surround (For SQ10U, EQ10U, LE650U, C6500U and LE642U models) Example You can adjust the sound quality to your preference with the The surround function produces Surround effect from the following settings. speakers. NOTE NOTE For operating the on-screen display menu, The Audio Settings menu is grayed out when "Output...
  • Page 41 On-Screen Display Menu Audio Settings (Continue) Harmonics Enhancer Extended Example This function improves the sound quality by extending the 3D Surround (for the UQ17U, TQ15U, SQ17U, SQ15U, selected range. LE657U and UD1U models) All Range: The low range will be extended and the sounds The surround function produces Surround effect from the in the medium and high ranges, which have been lost due speakers.
  • Page 42: Setup

    On-Screen Display Menu Setup Easy Setup Example You can run Easy Setup again, even after setting up the NOTE preset channels. For operating the on-screen display menu, NOTE see page 4-3. On the UD1U model, you cannot operate the "Easy Setup" When you select "Easy Setup", "CH Setup", "Parental function during 4K60P signal input.
  • Page 43 On-Screen Display Menu Setup (Continue) TV Channel Setup Example CH Setup Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if If Initial Installation does not memorize all the channels in there is no operation for several minutes.
  • Page 44 On-Screen Display Menu Setup (Continue) Antenna Setup-DIGITAL Example In order to receive digital air broadcasts, you need a digital Favorite CH (Favorite Channel Setting) broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup-DIGITAL" screen. If This function allows you to program 4 favorite channels, in 4 necessary, adjust the direction of the antenna to obtain the different categories.
  • Page 45 On-Screen Display Menu Setup (Continue) MPAA (Voluntary movie rating system) Example Example Parental Control (Parental Control Setting) V-Chip V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
  • Page 46 On-Screen Display Menu Content Setup (Continue) FV: Fantasy violence. Example V: Violence. TV Parental Guidelines S: Sexual situation. Example L: Adult language. D: Sexually suggestive dialog. Content Rating TV-Y TV-Y7 TV-G Suggested TV-PG TV-14 TV-MA Suggested age : The content rating can be set, but this rating is not TV-Y: All children.
  • Page 47 On-Screen Display Menu Setup (Continue) Canadian French Ratings Example E: Exempt programming. Canadian English Ratings G: General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a E: Exempt: Includes news, sports, documentaries and other humorous or unrealistic manner.
  • Page 48 On-Screen Display Menu Setup (Continue) Input Settings Example HDMI Setup - Auto View Reactivating the temporarily released V-CHIP BLOCK When you view images sent from external equipment in an You can reactivate the temporarily released V-CHIP BLOCK HDMI connection, this function allows the image size on the as shown below.
  • Page 49 On-Screen Display Menu Setup (Continue) Audio Select Example This function sets the terminal to output the computer audio. Input Skip The adjustment items vary depending on the input source. Select the input source corresponding to the terminal This setting allows you to skip the TV, HDMI or PC IN Input connected to the PC and then adjust the desired item.
  • Page 50 On-Screen Display Menu Setup (Continue) Setting Secret No. You can set and change the secret number by using 0-9. Example Color System Yes: Changes or sets the Secret No. No: The confirmation screen to clear the Secret No. appears Select the video signal system compatible with your when the Secret No.
  • Page 51: Smart Tv

    On-Screen Display Menu Smart TV Internet Setup Example Configures LAN and Internet settings. Dashboard Internet Connection You can display a list of the main Smart TV settings. You can connect your TV to the Internet using the setting item "Internet Connection". (See page 9-2 to 9-4.) NOTE On the UD1U model, you cannot operate the "Internet...
  • Page 52 On-Screen Display Menu Smart TV (Continue) When you display images by using the USB memory device or SD memory card *1: Example Create a folder named "WP" in the root directory of the Wallpaper USB memory device or SD memory card *1 (the first Activating the function will display still images when the TV is directory when the USB memory device or SD memory in standby mode.
  • Page 53 On-Screen Display Menu Smart TV (Continue) Example Clock Configures clock settings. Set the type of clock to use in wallpaper mode. Spring/Summer/Fall/Winter:A clock that represents the corresponding season will be displayed. Random:A randomly selected clock from among the four types will be displayed. Bluetooth (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, LE657U and UD1U models) Set this function when using the bluetooth devices with your...
  • Page 54 On-Screen Display Menu Smart TV (Continue) Other Devices Setting Though up to six devices (smartphones) can be registered, Example only one can be used at a time. Deletion of a Bluetooth Device Repairing is required whenever you change the device 1 Press / to select the device to delete, and then press being used.
  • Page 55 On-Screen Display Menu Smart TV (Continue) Example Home Network Make the settings for remote playback. (See page 6-13 (6-30 for UD1U model).) Advanced SmartCentral Sounds You can setting the volume of the SmartCentral sounds. High/Medium/Low/Off: Setting the volume of SmartCentral sounds NOTE If an external speaker is used, the operation sound will not...
  • Page 56: System Options

    On-Screen Display Menu You cannot select a different Power Saving item for each System Options AV MODE. Example When "Power Saving" is set, the "Automatic Light Sensor" NOTE settings for all AV Modes will automatically change. - If you set "Automatic Light Sensor" to "On" when "Power For operating the on-screen display menu, Saving"...
  • Page 57 On-Screen Display Menu System Options (Continue) View Mode Example This function changes the screen size. Shortcuts Select "Shortcuts" on the menu to display the View Mode menu screen. These functions are useful for adjusting the audio and video The View Mode menu varies depending on the input source. settings.
  • Page 58 On-Screen Display Menu System Options (Continue) Advanced Example Menu Design Change Audio Configures Letter and Caption screen display settings. Allows you to change the audio when multiple audio is available for the program you are watching. Channel Changing Effect You can select whether to use transition effects when NOTE changing channels.
  • Page 59 Mode" function during 4K60P signal input. Operate this Startup Screen function during the input of other types of signals (such as With this function activated, the SHARP logo will be displayed Full HD). when you turn on the TV. NOTE This function is not available when the TV is set to "Quick...
  • Page 60 On-Screen Display Menu System Options (Continue) Operation Lock Out Example This function locks the operation buttons on the TV and the Front Indicator Light remote control. When this function is set to "On", the LED on the front of the Off: No adjustment.
  • Page 61: Information

    (such as Full HD). Updating the Software with a USB Memory Device To check for the availability of a software update, visit http://www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BE-SHARP (800-237-4277). ENG 4-32...
  • Page 62 On-Screen Display Menu 2 Press / on the Manual Update screen to select "USB Information (Continue) Update", and then press ENTER. Example 3 Press ENTER to start checking the data in the USB CAUTION memory device. Do not remove the USB memory device or unplug the AC cord while the software is being updated.
  • Page 63 On-Screen Display Menu Information (Continue) Updating the Software via the Network Example 1 Press / on the Manual Update screen to select "Network 5 To update the TV software with the update file, select Update", and then press ENTER. "Yes", and then press ENTER. The TV connects to the network and checks for updates.
  • Page 64: Enjoying 3D Image Viewing

    You can use special 3D Glasses to watch 3D-supported images on this TV. objects. You can enjoy 3D movies on this TV by viewing the movie through SHARP 3D Glasses supplied The 3D Glasses are not recommended for people aged less than 6.
  • Page 65: Preparing For The 3D Glasses

    Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) 1 Power button: Preparing for the 3D glasses Part Names When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts. Supplied accessories (For the UQ17U, SQ17U, LE657U When the power button is pressed for 2 or more seconds and UD1U models)
  • Page 66: Using The 3D Glasses

    Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) Using the 3D glasses Using the 3D glasses Pairing the 3D glasses To view 3D images, it is necessary to pair the 3D glasses and Before using the 3D Glasses To confirm pairing of the 3D glasses and TV, make sure Before using the 3D glasses for the first time, remove the that 3D images are displayed on the TV screen.
  • Page 67 Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) 3 Replace the battery. Using the 3D glasses (Continue) Replacing the Battery Use the tip of a ballpoint pen or similar object to The battery has an expected service life of approximately 75 remove the battery.
  • Page 68: Specifications - 3D Glasses (Sold Separately)

    Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) Specifications - 3D glasses (sold separately) Product 3D Glasses Model number AN-3DG40 Lens type Liquid crystal shutter Power supply DC3V Battery Lithium button battery (CR2025 x 1) Battery life Approx.
  • Page 69: Troubleshooting - 3D Images

    Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) Troubleshooting - 3D Images Problem Possible solution 3D images are not displayed. Is “3D auto change” set to “Off”? Press 2D/3D to switch to 3D mode (Page 5-11).
  • Page 70: Display Methods For 3D And 2D Images

    Glasses) Top and Bottom Only the top image is stretched and displayed. The image does not appear in 3D. * These functions can also be used by the SQ10U, EQ10U, LE650U, C6500U and LE642U. ENG 5-7...
  • Page 71: Viewing 3D Images

    Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) 2 Turn on the 3D Glasses and place them on your head. Viewing 3D Images 3 You can now view 3D images. NOTE Switching from 3D to 2D Mode The TV screen may temporarily become black when the 4 Press 2D/3D during the 3D mode.
  • Page 72 ENTER. Take off the 3D Glasses and turn off the power. This function can also be used by the SQ10U, EQ10U, LE650U, C6500U and LE642U. Ending 3D Image Viewing 7 Take off the 3D Glasses and turn off the power.
  • Page 73 2 Select "Yes" and then press ENTER. The TV returns to the previous mode. This function can also be used by the SQ10U, EQ10U, LE650U, C6500U and LE642U. 3D Menu Pressing 2D/3D in 3D mode displays the 3D menu. Press the colored buttons to make the necessary settings.
  • Page 74: Configuring The Tv Setting To Enhance 3D Image Viewing

    Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) Configuring the TV Setting to 3D Setup You can make various settings to enhance 3D image viewing. Enhance 3D Image Viewing 3D Auto Change You can adjust the 3D image to the desired image quality and make various settings for 3D image viewing.
  • Page 75 You can adjust the 3D effect when converting images from 2D Appropriate 3D Glasses are required to view 3D images. mode to 3D mode. Purchase 3D Glasses for use with Sharp brand 3D LCD Select a desired level of convert effect from +1 to +16. TVs.
  • Page 76 Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U, LE657U and UD1U models) If you lie on your side while watching the TV with 3D Configuring the TV Setting to Glasses, the picture may look dark or may not be visible. Be sure to stay within the viewing angle and optimum TV Enhance 3D Image Viewing viewing distance when watching 3D images.
  • Page 77: Enjoying Photo/Music/Video Playback

    Enjoying Photo/Music/Video Playback (Except for UD1U) Preparation CAUTION Do not use a USB extension cable when connecting a USB memory device to the USB You can connect the TV to a USB memory device, USB hard drive or Home Network server to enjoy terminal on the TV.
  • Page 78: Selecting The Folders To Play Back

    Enjoying Photo/Music/Video Playback (Except for UD1U) Selecting the Folders to Play Back NOTE The Media screen can be displayed even by using the To play back data on a USB memory device, insert the USB application window. To display the application window, memory device on the TV.
  • Page 79 Enjoying Photo/Music/Video Playback (Except for UD1U) Selecting the Folders to Play Back NOTE Progressive format jpeg files are not supported. (Continue) USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Video file format Some video file formats may not be played depending on the file.
  • Page 80: Playing Back Files On A Usb Memory Device/Home Network Server

    If you do not switch to 3D mode for the 3D images, they will be displayed in 2D. For the SQ10U, EQ10U, LE650U, C6500U and LE642U models 3D images are always displayed in 2D mode. You can see the file name, shooting date, file size and...
  • Page 81 Enjoying Photo/Music/Video Playback (Except for UD1U) Playing Back Files on a USB Slide Show The photos displayed on the thumbnail selection screen are Memory Device/Home Network displayed as a slide show. Server (Continue) Buttons for slide show operation Buttons Description Viewing Individual Photos RETURN Return to the thumbnail selection...
  • Page 82 Enjoying Photo/Music/Video Playback (Except for UD1U) Playing Back Files on a USB Select Slide Show BGM The music list screen appears when you select "Select Slide Memory Device/Home Network Show BGM". You can select the music to be played in the background Server (Continue) while the slide show is being displayed.
  • Page 83 Enjoying Photo/Music/Video Playback (Except for UD1U) Playing Back Files on a USB USB Menu On the menu to be displayed in USB mode, use / to select Memory Device/Home Network an item and make settings to your preferences. Server (Continue) Example Music Mode Example...
  • Page 84 Enjoying Photo/Music/Video Playback (Except for UD1U) Playing Back Files on a USB NOTE The key guide display disappears automatically after a Memory Device/Home Network particular time has elapsed. To display the key guide display again, press DISPLAY. Server (Continue) Video Mode Example Buttons for file selecting operations Buttons...
  • Page 85 Enjoying Photo/Music/Video Playback (Except for UD1U) Buttons Description Playing Back Files on a USB 2D/3D*1 Switches between 2D and 3D modes. Memory Device/Home Network A (red)*2 Jump to the scene where playback Server (Continue) was last stopped. B (green) Stop a video. Buttons for playing mode Buttons Description...
  • Page 86 Enjoying Photo/Music/Video Playback (Except for UD1U) Menu for playing mode Playing Back Files on a USB Example Memory Device/Home Network Server (Continue) USB Menu On the menu to be displayed in USB mode, use / to select an item and make settings to your preferences. Menu for file selecting operations Example See page 6-6...
  • Page 87 Enjoying Photo/Music/Video Playback (Except for UD1U) Buttons for using the USB operation panel Playing Back Files on a USB Hold down to go in reverse. Memory Device/Home Network Starts playback. Server (Continue) Hold down to fast forward. USB Operation Panel/Home Network Operation Panel Video without chapters: Press once to You can use the operation panel for video playback return to the previous playback point.*...
  • Page 88 Enjoying Photo/Music/Video Playback (Except for UD1U) Playing Back Files on a USB Memory Device/Home Network Server (Continue) NOTE Reverse/fast forward continues from one file to another during continuous playback. Use "CC" on the operation panel to change the Closed Caption display. You can also switch the Closed Caption display by using "System Options"...
  • Page 89: Playing Back Files From A Portable Device Or Pc

    Enjoying Photo/Music/Video Playback (Except for UD1U) Playing Back Files from a Portable Device or PC With the remote playback function, you can use your portable device to play back pictures, video, and music on the Home Network server. This TV is a DLNA certified Digital Media Renderer (DMR). To use the remote playback function, your portable device must be a DLNA Certified Digital Media Controller.
  • Page 90: Presetting Remote Control Function

    Enjoying Photo/Music/Video Playback (Except for UD1U) Manufacturer codes Presetting Remote Control Function REMOTE CONTROL STB BRAND You can operate the connected AV products (AV receiver, CODE NUMBER cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. ANVISION 04, 05 Presetting manufacturer codes...
  • Page 91 09, 16, 17, 22 PIONEER 30, 33, 35 KENWOOD PROSCAN MAGNAVOX 04, 05, 06 25, 39 MAGNIN SAMSUNG 29, 34 MEMOREX SHARP 23, 32, 41, 42 MONTGOMERY WARD SONY 27, 40 TOSHIBA PANASONIC 04, 18, 19, 20, 21 YAMAHA PENTAX ZENITH PHILCO...
  • Page 92 Enjoying Photo/Music/Video Playback (Except for UD1U) REMOTE CONTROL Presetting Remote Control Function AUDIO BRAND CODE NUMBER (Continue) SHARP REMOTE CONTROL SHARP (SOUND BAR) VCR BRAND CODE NUMBER SHARP 01, 02, 03 SONY 07, 08, 15 SYLVANIA 04, 05, 06 TATUNG...
  • Page 93: Operating The Connected Equipment

    Enjoying Photo/Music/Video Playback (Except for UD1U) 11 CH Operating the Connected Press CH or CH to tune in to a higher or lower channel. (STB) Equipment Press to select the channel of the TV tuner on the VCR. To operate the connected equipment, press STB, DVD•VCR (VCR) or AUDIO to select your device.
  • Page 94: (For The Ud1U Model)

    Enjoying Photo/Music/Video Playback (For the UD1U model) Preparation CAUTION Do not use a USB extension cable when connecting a USB memory device to the USB You can connect the TV to a USB memory device, USB hard drive, SD memory card or Home terminal on the TV.
  • Page 95: Selecting The Folders To Play Back

    Enjoying Photo/Music/Video Playback (For the UD1U model) You do not need to select the drive/server in step 3 when Selecting the Folders to Play Back there is only one drive in the connected USB memory device or SD memory card or there is only one Home To play back data on a USB memory device or SD memory Network server connected to the TV.
  • Page 96 Enjoying Photo/Music/Video Playback (For the UD1U model) Selecting the Folders to Play Back NOTE Progressive format jpeg files are not supported. (Continue) USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Video file format Some video file formats may not be played depending on the file.
  • Page 97 Enjoying Photo/Music/Video Playback (For the UD1U model) Buttons for thumbnail operations Playing Back Files on a USB Buttons Description Memory Device/SD Memory / / / Select a desired item. Card/Home Network Server ENTER When selecting a folder icon: Enter this directory. NOTE When selecting a photo thumbnail: The screen images in this section are for the USB mode.
  • Page 98 Enjoying Photo/Music/Video Playback (For the UD1U model) Playing Back Files on a USB Slide Show The photos displayed on the thumbnail selection screen are Memory Device/SD Memory displayed as a slide show. Card/Home Network Server Buttons for slide show operation (Continue) Buttons Description...
  • Page 99 Enjoying Photo/Music/Video Playback (For the UD1U model) Playing Back Files on a USB Select Slide Show BGM The music list screen appears when you select "Select Slide Memory Device/SD Memory Show BGM". You can select the music to be played in the background Card/Home Network Server while the slide show is being displayed.
  • Page 100 Enjoying Photo/Music/Video Playback (For the UD1U model) Playing Back Files on a USB USB Menu or SD Menu On the menu to be displayed in USB or SD mode, use / Memory Device/SD Memory select an item and make settings to your preferences. Card/Home Network Server Example (Continue)
  • Page 101 Enjoying Photo/Music/Video Playback (For the UD1U model) Playing Back Files on a USB NOTE The key guide display disappears automatically after a Memory Device/SD Memory particular time has elapsed. To display the key guide display again, press DISPLAY. Card/Home Network Server (Continue) Video Mode Example...
  • Page 102 Enjoying Photo/Music/Video Playback (For the UD1U model) Buttons Description Playing Back Files on a USB 2D/3D Switches between 2D and 3D modes. Memory Device/SD Memory A (red)*1 Jump to the scene where playback Card/Home Network Server was last stopped. (Continue) B (green) Stop a video.
  • Page 103 Enjoying Photo/Music/Video Playback (For the UD1U model) Menu for playing mode Playing Back Files on a USB Example Memory Device/SD Memory Card/Home Network Server (Continue) USB Menu or SD Menu On the menu to be displayed in USB or SD mode, use / select an item and make settings to your preferences.
  • Page 104 Enjoying Photo/Music/Video Playback (For the UD1U model) Buttons for using the USB operation panel Playing Back Files on a USB Hold down to go in reverse. Memory Device/SD Memory Starts playback. Card/Home Network Server Hold down to fast forward. (Continue) Video without chapters: Press once to return to the previous playback point.* USB Operation Panel/Home Network Operation Panel...
  • Page 105 Enjoying Photo/Music/Video Playback (For the UD1U model) Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue) NOTE Reverse/fast forward continues from one file to another during continuous playback. Use "CC" on the operation panel to change the Closed Caption display.
  • Page 106: Network Server

    Enjoying Photo/Music/Video Playback (For the UD1U model) Playing Back Files from a Portable Device or PC With the remote playback function, you can use your portable device to play back pictures, video, and music on the Home Network server. This TV is a DLNA certified Digital Media Renderer (DMR). To use the remote playback function, your portable device must be a DLNA Certified Digital Media Controller.
  • Page 107: Presetting Remote Control Function

    Enjoying Photo/Music/Video Playback (For the UD1U model) Manufacturer codes Presetting Remote Control Function REMOTE CONTROL STB BRAND You can operate the connected AV products (AV receiver, CODE NUMBER cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. ANVISION 04, 05 Presetting manufacturer codes...
  • Page 108 09, 16, 17, 22 PIONEER 30, 33, 35 KENWOOD PROSCAN MAGNAVOX 04, 05, 06 25, 39 MAGNIN SAMSUNG 29, 34 MEMOREX SHARP 23, 32, 41, 42 MONTGOMERY WARD SONY 27, 40 TOSHIBA PANASONIC 04, 18, 19, 20, 21 YAMAHA PENTAX ZENITH PHILCO...
  • Page 109 Enjoying Photo/Music/Video Playback (For the UD1U model) REMOTE CONTROL Presetting Remote Control Function AUDIO BRAND CODE NUMBER (Continue) SHARP REMOTE CONTROL SHARP (SOUND BAR) VCR BRAND CODE NUMBER SHARP 01, 02, 03 SONY 07, 08, 15 SYLVANIA 04, 05, 06...
  • Page 110: Operating The Connected Equipment

    Enjoying Photo/Music/Video Playback (For the UD1U model) 11 CH Operating the Connected Press CH or CH to tune in to a higher or lower channel. (STB) Equipment Press to select the channel of the TV tuner on the VCR. To operate the connected equipment, press STB, DVD•VCR (VCR) or AUDIO to select your device.
  • Page 111: Using Aquos Link

    Using AQUOS LINK Connected AQUOS LINK-compatible devices can be operated without changing the settings of the Controlling HDMI Equipment Using AQUOS LINK remote control unit. The OPTION button will function only when AQUOS LINK is used. What’s AQUOS LINK? Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can One Touch Play interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
  • Page 112 Make the settings to use AQUOS LINK. Set the settings with ARC-compatible AV amplifier connected to the ARC- "Setup" > "Advanced" > "AQUOS LINK Setup". compatible HDMI IN terminal. EQ/LE650U/C6500U/LE642U series:HDMI IN 1 AQUOS LINK Control UQ/TQ/SQ/LE657U/UD1U series:HDMI IN 3 Select AQUOS LINK Control to disable the AQUOS LINK (Refer to the operation manual of the ARC-compatible equipment for details.)
  • Page 113 Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK (Continue) One Touch Playback AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control. Press to start playing back a title. The last played program is played back. You can use the following buttons during broadcast viewing.
  • Page 114: Link Operation Menu

    Using AQUOS LINK Link Operation Menu Recorder Power On/Off You can manually turn on/off the power of the connected AQUOS LINK-compatible equipment. Each time you press ENTER, the connected equipment switches on or off. Device Operation Panel You can use the device operation panel to control playback operations.
  • Page 115 Using AQUOS LINK Link Operation Menu (Continue) Change Audio Output Device You can select to listen to the TV sound only from the Show Start Menu AQUOS LINK-compatible audio system. You can call up a setup menu from the connected AQUOS By AQUOS audio SP: The sound from the TV speaker is LINK-compatible equipment.
  • Page 116: Using A Smartphone With The Tv

    Using AQUOS LINK Using a Smartphone with the TV Auto Power On When an MHL-compatible device is connected to the TV, the This function enables you to connect the TV to a smartphone TV turns on automatically. that supports Mobile High-Definition Link This function operates when "AQUOS LINK Control"...
  • Page 117: Using A Pc

    Using a PC Adjusting the PC Image You can adjust the position of the image input from a PC the settings with "Setup" > "Input Settings" > "PC input". Auto Sync. (for Analog PC Input Mode Only) For automatically adjusting the PC image. Yes: Auto Sync.
  • Page 118: Setting Audio Input

    Using a PC Setting Audio Input Audio Select This function sets the terminal to output the computer audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. To perform the operation, refer to "Setup"...
  • Page 119: Control Of The Tv

    Using a PC Control of the TV Communication Conditions for IP Connect to the TV with the following settings made for IP on the PC. The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for IP protocol: TCP/IP...
  • Page 120 Using a PC Control of the TV (Continue) Command table Commands not indicated here are not guaranteed to operate. Command format CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS Eight ASCII codes +CR POWER ON The Power On COMMAND SETTING command rejected. On [RS-232C] The Power On Command 4-digits: Command.
  • Page 121 Using a PC CONTROL Control of the TV (Continue) COMMAND PARAMETER CONTROL CONTENTS ITEM CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS VIEW MODE 0: (Toggle) [AV], 0: Although it can 1: Side Bar [AV], choose now, it is AV MODE SELECTION 0: (Toggle), Although it can 2: S.Stretch [AV]...
  • Page 122 CHANNEL NO. (Designate 7: 3D Stadium major channel) For the SQ10U, EQ10U, D C 2 L * (0-999) DIGITAL Cable (Two-Part LE650U, C6500U and numbers, 3-digit plus 3-digit) LE642U models: Rear half of DIGITAL CABLE 0: (Toggle), CHANNEL NO. (Designate 1: On,...
  • Page 123 Using a PC CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS Control of the TV (Continue) SOFTWARE The current version CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS VERSION of the TV software is displayed. CHANNEL DIRECT (0-9999) DIGITAL Cable CHANNEL (One-Part IP PROTOCOL The currently (DIGITAL) numbers, 5-...
  • Page 124 Using a PC Control of the TV (Continue) NOTE If an underbar (_) appears in the parameter column, enter a space. CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
  • Page 125: Pc Compatibility Chart

    Using a PC PC Compatibility Chart It is necessary to set the PC correctly to display XGA and WXGA signal. Horizontal Vertical Resolution VESA Standard Frequency Frequency 720 x 400 31.5 kHz 70 Hz — 31.5 kHz 60 Hz 640 x 480 37.9 kHz 72 Hz 37.5 kHz...
  • Page 126: Using The Internet

    Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. NOTE You can enjoy a variety of streaming content and Internet applications. This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may (See pages 9-12 to 9-14.) result in radio communications that do not comply with regulations on radio communications.
  • Page 127: Internet Setup

    Using the Internet Internet Setup Internet Connection You can connect your TV to the Internet using the setting item Perform the procedure below to make adjustments or to "Internet Connection". confirm the settings for accessing the Internet. NOTE 1 Press MENU to display the MENU screen, and then press ENTER.
  • Page 128 Using the Internet Internet Setup (Continue) NOTE Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification. Wireless Setup A wireless LAN router/access point is required to connect Make adjustments and confirm the settings necessary for the TV to the Internet using a wireless LAN.
  • Page 129 Using the Internet Internet Setup (Continue) Connection Test After the connecting and setting procedures have been completed, you can check that the preparation is correct. Press "Yes" to start the "Connection Test". When the test results are displayed, follow the instructions shown on the screen.
  • Page 130: Entering Text (Software Keyboard)

    Using the Internet Entering Text (Software Keyboard) When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter text from the software keyboard. NOTE You can enter up to 128 characters for text. Some special characters or diacritics may not be available depending on where you enter the text.
  • Page 131 Using the Internet Buttons on the Entering Text (Software Keyboard) Description remote control unit (Continue) / / / Moves the focus. When moved at the far edge, the focus moves to the Enter opposite edge. Applies the entered information and closes the software keyboard.
  • Page 132: Using The Browser

    Using the Internet Using the Browser 1 Press SmartCentral, press / (or / ) to select the browser icon from the application window, and then press ENTER. Press SmartCentral again to display a list of applications by category. Buttons for Using the Browser VIEW MODE Each time you press VIEW MODE when a browser screen is shown, the display pattern toggles between a...
  • Page 133 Using the Internet Using the Browser (Continue) Selected Selected Description Description item item Allows you to go back to the previous page. Displays the bookmarks list. Allows you to go to the next page. Displays your browsing history. Configures browser settings such as your home Refreshes the page.
  • Page 134 This window appears when you visit a web page that has DISCLAIMERS security protection, or when you move from a protected SHARP corporation bears no responsibility regarding the page to an unprotected page. content and quality of the content provided by the content In "Security"...
  • Page 135 Using the Internet Certificates: Display the list of certificates. You can choose Using the Browser (Continue) to enable/disable a certificate. Disable certificate are shown unticked in the certificate Browser Settings list screen. You can check or modify your browser settings from the Cookies:  Accept all: Select this option to accept all cookies.
  • Page 136: Using Keyboard And Mouse

    Using the Internet Using Keyboard and Mouse You can use a keyboard or mouse for operating the TV while using the browser. When you use the USB devices, connect the device to the USB terminal on the TV. When you use the bluetooth device, make necessary settings with "Bluetooth".
  • Page 137: Using Applications Via The Internet

    Using the Internet Using Applications via the Internet Using the Application Window During Dock Display By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, music and photos. You can move the application icons and delete any unused Please check that the most current software is loaded on TV icons.
  • Page 138 Using the Internet Using Applications via the Internet (Continue) During Gallery Display During Dock display, press SmartCentral again to display a list of applications by category. 1 Press to select a category, and then press ENTER or 2 Press / / / to select an application, and then press ENTER.
  • Page 139 Using the Internet Using Applications via the Internet (Continue) SmartCentral TV/Streaming When "TV" or "Streaming" is selected on the SmartCentral screen, a list of broadcast programs or VOD is displayed. (TV)Guide: Displays a list of all broadcast programs. (Streaming)New: Displays a list of new content. Popular: Displays popular programs.
  • Page 140: Notes

    This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
  • Page 141: Using The Bluetooth/Miracast Devices

    Using the Bluetooth/Miracast devices Bluetooth devices (For the UQ17U, TQ15U, SQ17U, SQ15U, SQ10U, LE657U and UD1U models) You can listen to music from your TV when you connect a smartphone or other Bluetooth music player to your TV. And when "Quick Start Mode" is set to "ON", you can also turn on your TV with a Bluetooth signal. (The TV automatically goes to the Bluetooth Music playback screen) 1 Switch the TV input to "Bluetooth".
  • Page 142: Appendix

    Appendix 3 Detach the stand from the TV. Removing the Stand Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. CAUTION Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
  • Page 143: Setting The Tv On The Wall

    Using an optional bracket to mount the TV SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to You can ask a qualified service professional about using an optional AN-52AG4 bracket to mount install the wall mount on your own.
  • Page 144 Appendix Setting the TV on the Wall(Continue) LC-70UQ17U/LC-70TQ15U/LC-70SQ17U/LC-70SQ15U/LC-70SQ10U/ LC-70LE650U/LC-70C6500U/LC-60LE650U/LC-60C6500U LC-70EQ10U/LC-60UQ17U/LC-60TQ15U/LC-60SQ17U/LC-60SQ15U/ LC-60SQ10U/LC-60EQ10U LC-70UD1U The location of the AC cord holder differs depending on whether it is in its shipment location (A)or has been used as a cable tie (B). LC-80UQ17U/LC-80LE650U/LC-90LE657U/LC-80LE642U ENG 11-3...
  • Page 145 Appendix Setting the TV on the Wall(Continue) Wall Mount Kit Specifications Standard dimensions for wall mount kits are shown below. The illustration is based on the LC-80UQ17U model as an example. a1: Maximum distance from the mounting hole a2: Maximum distance from the TV's center b1: Distance between the TV's center and the mounting hole b2: Maximum distance from the TV's center b3: Maximum distance from the mounting hole...
  • Page 146 Appendix Setting the TV on the Wall(Continue) Wall Mount Kit Specifications (For the UD1U model) When mounting your TV on a wall, avoid that the DuoBass unit on the rear does not come in contact with the wall. Use a Wall Mount Kit with bracket thickness*1 of 2 49/64 inches (70 mm) or more and inter-bracket space*2 of 12 39/64 inches (320 mm) or more.
  • Page 147 Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the TV. Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.
  • Page 148: Troubleshooting

    Appendix Problem Possible Solution Troubleshooting No picture Is connection to other components correct? Problem Possible Solution Is the correct input selected? Pages 2-1 No power Check if you pressed POWER on the remote control unit. Is "On" selected in "Audio Only"? Is the AC cord disconnected? Page 4-27 Has the power been turned on?
  • Page 149 Appendix Problem Possible Solution Troubleshooting (Continue) No sound If you are using a DVI-HDMI conversion cable to connect external Problem Possible Solution equipment to the TV, check the following: - Is an audio cable connected? The DVI-HDMI conversion cable is No sound Is connection to other components correct? for video only.
  • Page 150: Troubleshooting - 3D Images

    Appendix Troubleshooting - 3D Images Problem Possible Solution 3D images are not Is "3D Auto Change" set to "Off"? Press 2D/3D to switch to 3D displayed. mode. Page 5-11 If "3D Auto Change" is set to "Mode 1" or "Mode 2" but no 3D images are displayed, check the display format of the content being viewed.
  • Page 151: Troubleshooting - Error Message

    Appendix Troubleshooting - Error Message The example of an error message displayed on a Error code Possible Solution screen Failed to receive E202 Check the antenna cable. Check that the antenna broadcast. is correctly setup. No broadcast now. E203 Check the broadcast time in the program guide. An incompatible audio —...
  • Page 152: Information On The Software License For This Product

    The software included in this product is comprised of various software components whose individual "CH Setup” ( "TV Channel Setup" Setup menu). copyrights are held by SHARP or by third parties. "Parental Control" ( Setup menu). "Interactive Service" ( "Internet Setup"...
  • Page 153: Specifications

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 154: Tv (For The Tq15U Models)

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 155: Tv (For The Sq17U, Sq15U And Sq10U Models)

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 156: Tv (For The Eq10U Models)

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 157: Tv (For The Le650U And C6500U Models)

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 158: Tv (For The Le657U Model)

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 159: Tv (For The Le642U Model)

    *1 Emergency alert messages via Cable are unreceivable. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 160: Tv (For The Ud1U Model)

    *2 If you insert any card other than the SD/SDHC (class 6 or higher), it will not work. As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
  • Page 161: Wireless Lan

    Specifications Wireless LAN Specification Standard IEEE 802.11a/b/g/n 2412-2484 MHz Frequency Band 5150-5850 MHz Static WEP (64/128 bit key Index 1 only) Security WPA-PSK (TKIP) WPA2-PSK (AES) DBPSK@1Mbps DQPSK@2Mbps [email protected]/11Mbps Modulation BPSK@6/9 Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mbps and above, Rx up to 300Mbps ENG 12-9...
  • Page 162: Bluetooth (For The Uq17U, Tq15U, Sq17U, Sq15U, Sq10U, Le657U And Ud1U Models)

    IFETEL: RCPHOAR14-0001 levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR). Nombre de la marca del módulo con licencia: SHARP CORPORATION Nombre de modelo del módulo con licencia: ARC0557 Módulo ARC0557 instalado adentro de esta gafas...
  • Page 163: Trademarks

    Dolby Laboratories. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SHARP Corporation is under license. Other The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo trademarks and trade names are those of their respective owners.
  • Page 164: Dimensional Drawings

    Dimensional Drawings LC-80UQ17U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-1...
  • Page 165 Dimensional Drawings LC-70UQ17U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-2...
  • Page 166 Dimensional Drawings LC-60UQ17U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-3...
  • Page 167 Dimensional Drawings LC-70TQ15U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-4...
  • Page 168 Dimensional Drawings LC-60TQ15U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-5...
  • Page 169 Dimensional Drawings LC-70SQ17U/LC-70SQ15U/LC-70SQ10U/LC-70EQ10U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-6...
  • Page 170 Dimensional Drawings LC-60SQ17U/LC-60SQ15U/LC-60SQ10U/LC-60EQ10U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-7...
  • Page 171 Dimensional Drawings LC-80LE650U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-8...
  • Page 172 Dimensional Drawings LC-70LE650U/LC-70C6500U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-9...
  • Page 173 Dimensional Drawings LC-60LE650U/LC-60C6500U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-10...
  • Page 174 Dimensional Drawings LC-90LE657U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-11...
  • Page 175 Dimensional Drawings LC-80LE642U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-12...
  • Page 176 Dimensional Drawings LC-70UD1U Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) *1 Active area/Área activa/Zone active *2 Thinnest part/Parte más delgada/Partie la plus mince *3 Including projecting parts/Incluyendo partes salientes/Parties saillantes incluses ENG 14-13...

This manual is also suitable for:

C6500uLe642ul uq17uTq16uSq17uSq10uEq10u ... Show all

Table of Contents