Siemens EC945RB91A User Instructions

Siemens EC945RB91A User Instructions

Hide thumbs Also See for EC945RB91A:

Quick Links

GMK10047
Table of Contents
loading

Summary of Contents for Siemens EC945RB91A

  • Page 1 GMK10047...
  • Page 2: Table Of Contents

    Converting the cooktop from Nat. Gas to Universal LPG ...5 Additional information on products, accessories, replacement Changing the nozzles of the burners on the cooktop ....5 parts and services can be found at www.siemens-home.com Adjustment of the taps...............5 and in the online shop www.siemens-eshop.com...
  • Page 3: Installation

    Installation Statutory requirements Preparing to install Refer to AS/NZS 5601.1 for piping size details. These built-in This installation must conform with the following: cooktops are intended to be inserted in a benchtop cutout. Manufacturer’s Installation instructions ■ Only an officially authorised technician should connect the Local Gas Fitting Regulations ■...
  • Page 4: Installation Of Cooktop Into The Kitchen Bench

    A minimum depth of 50 mm from the top of the worktop Connection surface must be provided for the appliance. Electrical If the base of the hotplate can be touched, a protecting shield must be fitted. An electrical 10 amp socket needs to be within 1 m of the hotplate to allow electrical connection.
  • Page 5: Converting The Cooktop From Nat. Gas To Universal Lpg

    than 1.2 m long and installed in accordance with AS/NZS Ensure that it is completely tightened in order to guarantee 5601.1. the seal. Ensure that the hose does not contact the hot surfaces of the hotplate, oven, dishwasher or any other appliance that may be installed underneath or next to the hotplate.
  • Page 6: Operating Instructions

    To assemble the grease splash tray again, proceed in the Never remove the tap spindle. In the event of a malfunction, reverse order to removal. change the whole tap. It is important that all the seals are refitted to form a seal. Important: After finishing, stick the sticker, indicating the new gas type, close to the specifications plate.
  • Page 7: Operation

    Operation Switching off a burner Turn the corresponding control knob clockwise to the 0 setting. There are indications to show which burner each control knob operates. Power levels The progressive control knobs can be used to control the power needed, from minimum to maximum power. Ú...
  • Page 8: Cooking Pans

    flame is normal and simply indicates the presence of salt in the Do not use damaged pans, atmosphere (from cooking). If the flame has yellow patches, which do not sit evenly on the this is not a fault (of any kind). hob.
  • Page 9: Service

    Due to the high temperatures endured, the wok burner and the Caution! stainless steel zones (grease drip tray, burner outline, etc.) can The stainless steel cleaner must not be used in the area around change colour. This is normal. After each use, clean these the controls.
  • Page 10: Wiring Diagram

    Wiring diagram Switch Blue wire Brown wire Terminal Ignition module...
  • Page 11 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9000803399* 9000803399...

Table of Contents