JVC DR-MV1 Instructions Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. DVR
  5. DR-MV1
  6. Instructions manual

JVC DR-MV1 Instructions Manual

Dvd video recorder & video cassette recorder
Hide thumbs Also See for DR-MV1:
Table of Contents

Quick Links

DVD VIDEO RECORDER &
VIDEO CASSETTE RECORDER
DR-MV1
CABLE/DBS
TV
DVD
TV/CBL/DBS
VCR
DVD
VCR
/DVD
TIMER
TIMER
/DVD
NUMBER / TV CH / DVD CH
NUMBER / TV CH / DVD CH
1
2
3
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
0
CANCEL
AUX
MEMO/MARK
PROG/CHECK DISPLAY ON SCREEN
VCR PLUS+
PROGRESSIVE
SCAN
ENTER
PREVIOUS
NEXT
SLOW
PLAY/SELECT
SLOW
STOP/
CLEAR
PAUSE
REMAIN
REC
REC MODE
POWER
ANGLE
SUBTITLE
LIVE CHECK
TV
CH
VOL.
TV/VCR
AUDIO
VCR EJECT
TV/DVD
TV/CBL/DVD
TV
PULL-OPEN
DVD
Downloaded From DvDPlayer-Manual.com JVC Manuals
VCR/DVD
TIMER
VCR
REC
F-1
S-VIDEO
VIDEO
(MONO) L - AUDIO - R
INSTRUCTIONS
OPEN/CLOSE
STOP
PLAY
TIMER
DVD
REC
VCR
DUBBING
DVD
PULL-OPEN
REMAIN
REC
PAUSE
REW
FF
REC LINK
CH
DV IN
REC MODE
<<
SLOW
>>
DVD
EN
LPT0937-001A
Table of Contents
loading

Related Manuals for JVC DR-MV1

Summary of Contents for JVC DR-MV1

  • Page 1 AUDIO VCR EJECT VCR/DVD TIMER OPEN/CLOSE STOP PLAY TIMER DUBBING TV/DVD TV/CBL/DVD PULL-OPEN PULL-OPEN REMAIN PAUSE REC LINK DV IN REC MODE << SLOW >> S-VIDEO VIDEO (MONO) L - AUDIO - R INSTRUCTIONS Downloaded From DvDPlayer-Manual.com JVC Manuals LPT0937-001A...

  • Page 2: Safety Precautions

    Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 3 For Italy: Moisture in the air will condense on the unit when you move it from “It is declared that this product, brand JVC, conforms to the a cold place to a warm place, or under extremely humid Ministry Decree n. 548 of 28 Aug.’95 published in the Official conditions—just as water droplets form on the surface of a glass...
  • Page 4 ● The DVD deck is automatically selected and the DVD lamp lights up Start recording on the DVD deck. ( pg. 40) on the unit. Press VCR/DVD. Operate the DVD deck. Operate the VCR deck. Timer standby mode Playback, recording, etc. Playback, recording, etc. Recording Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 5: Table Of Contents

    Digital Audio Dubbing ..............73 REMOTE CONTROL Remote Control Functions ............74 Connecting To A Satellite Receiver ..........76 SYSTEM CONNECTION Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS ................77 Connecting/Using A Decoder ............77 Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 6: Disc Information

    Using discs manufactured by JVC is depending on the disc and recording conditions. ● It is impossible to record on CD-R/RW or DVD-R discs used for recommended since they have been tested to be compatible with this unit.
  • Page 7 DVD VIDEO disc. disc including JPEG distorted. This is not a malfunction. files. ● DVD-AUDIO discs compatible with DVD video players can be played. ● Super Audio CDs (SACD) compatible with conventional CD players can be played. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 8 PBC function even when playing a PBC-compatible disc. ( pg. 28) ● Regarding the contents recorded on discs Some files may not be played back depending on the file types and other factors. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 9 DIGITAL AUDIO OUT connector of the unit. Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 10 Sometimes during playback, noise may appear or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.) These symptoms are caused by the discs, not by the malfunction of the unit. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 11: Index

    When using a monaural audio cable, use AUDIO L (MONO) input To access covered connectors, pull connector. In this case, the sound on the left channel is also and open the connector cover. recorded on the right channel. PULL-OPEN DV IN << >> SLOW Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 12 72) — “JUST CLOCK” is set to “ON” ( pg. 85) (Set “JUST CLOCK” to “OFF” if you mind the noise of the fan.) D Audio Output Connectors (AUDIO OUTPUT (LEFT/ RIGHT)) pg. 16, 71 Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 13 Chapter number being played back are displayed on the Also displays status of the unit (NO DISC/OPEN/CLOSE/ Multi Display. READING). G Simulated Surround Effect Indicator (3D) pg. 36 Lights when a simulated surround effect is set to “3D-ON” on the on- screen bar. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 14 53 Input Indicator (L-1, L-2, F-1 or SAT**) G Audio Mode Display pg. 51 * When “L-2 SELECT” is set to “SAT” ( pg. 81), “SAT” appears instead of “L-2”. N “Cassette Loaded” Mark Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 15 The remote control can operate most of your unit’s functions, as Buttons with a small dot on the left side of the name can also be well as basic functions of TV sets or satellite receiver of JVC and used to operate your TV. ( pg.

  • Page 16: Installing Your New Unit

    50 seconds for the unit to be turned on. This is not a malfunction. After connection is completed, perform “Auto Set Up” on page 17. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 17: Initial Settings

    ● If you have selected any other country name, go to step 4. Press rt w e to select the language of your choice, then press ENTER. The AUTO SET/ T-V LINK display appears on the TV screen. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 18: Preset Download

    0–9, –, , + and (space). Some names of downloaded stations may differ from those of your TV. ( pg. 84) After “Preset Download” is completed, perform “Monitor Set (DVD Deck Only)” on page 23. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 19 ( pg. 43, 54) ● Your unit memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture. ( pg. 84, “Delete A Channel”) Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 20: Language

    ENTER. ● See “Language Code List” pg. 96). Press SET UP to complete the setting. NOTE: When the selected language is not available on the disc, the disc’s default menu language is played back. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 21: Satellite Receiver Control Setting

    ENTER twice. The unit enters the Test mode. ● You can select the channel VCR/DVD position between 1 to 999. DISPLAY DISPLAY Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 22 ● When selecting the satellite receiver’s channel ( step 7), signals from the remote control may interfere with signals transmitted from the Satellite Controller. In this case, move the remote control as close to the unit’s infrared beam receiving window as possible. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 23: Monitor Set (Dvd Deck Only)

    ● The picture will be shown in the “4:3LB” mode depending on the disc even if the “4:3PS” mode is selected. Letter Box Black bands appear at the top and bottom of the image. The image itself appears in 16:9 aspect ratio. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 24: Operations On Dvd Deck

    ● It may take a few seconds to start playback. This is not a malfunction. ● Forward/reverse high-speed search and other operations cannot be performed while playback is stopped. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 25: Playback Features

    During playback, press and hold 6 for 2 or more seconds for forward high-speed search, or press and hold 2 for 2 or more seconds for reverse high-speed search. ● Releasing the button resumes normal playback. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 26 RESUME” will be cleared. ● Resume points are memorized for each side of a double-sided disc. During playback, press ● Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 27 Total remaining time ] Current track elapsed time ] Current track remaining time ] Total elapsed time ] (back to the beginning) NOTE: When a PBC-compatible Video CD/SVCD disc is loaded, deactivate the PBC function. ( pg. 28) Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 28 On-Screen Display For main and sub audio of bilingual programme For main audio of bilingual programme For sub audio of bilingual programme For stereo discs For audio of left channel For audio of right channel Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 29: Live Memory Playback

    Not only can this unit play back a programme previously recorded while recording or timer recording another programme, but the unit also allows you to play back from the beginning of a programme Superimpose display while continuing to record the same programme. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 30 ● Live Memory Playback cannot be performed while recording the recorded. source from DV input. ● When LIVE CHECK is pressed to display the picture currently being recorded, the picture size may not be correct. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 31 Recording start position Current playback position Current recording position Live Memory Playback of another programme Total length of the programme being played back Blue (recorded part) Green (playing part) Orange (recording part) Black (unrecorded or unplayed part) Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 32 1/16 times, 1/4 times and 1/2 times the normal speed. Stops Live Memory Playback to return to the screen being recorded. Then a resume point is stored. Pressing 8 again stops recording. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 33: Using The On-Screen Bar

    Press rt to select the desired option, then press ENTER. DVD VIDEO To clear the on-screen bar Video CD/SVCD Press ON SCREEN. NOTE: See the corresponding pages for details on each menu item. JPEG disc Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 34 Repeat the above procedure from step 1, select “OFF” in step 3, then press ENTER. NOTES: ● Repeat Playback is not possible for a Video CD/SVCD with PBC function. ● Repeat Playback may not work properly depending on the type of the disc being used. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 35 TV screen as well. enter the section’s number depending on the disc. ● This function is not possible for a Video CD/SVCD with PBC function. ● This function is not possible for a Video CD/SVCD with PBC function. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 36 ● Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the DIGITAL AUDIO OUTPUT connector. ● When Simulated Surround Effect is activated, the settings of “ANALOG AUDIO OUT” and “D. RANGE CONTROL” are disabled. pg. 78) Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 37 To clear the on-screen bar and the contents of the programme Press ON SCREEN. To cancel Programme Playback Press w e to select “PRGM”, then press ENTER. NOTE: Programme Playback is not possible depending on the type of disc. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 38 To clear the on-screen bar Press ON SCREEN. To cancel Random Playback Perform steps 1 and 2. NOTE: The same track will not be played back more than once during Random Playback. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 39: Parental Lock

    ENTER. Press rt to select your country code, then press ENTER. Downloaded From DvDPlayer-Manual.com JVC Manuals ● If you do not need to change your country code, jump to 12. ● See “Country/Area Code List for Parental Lock” ( pg. 97)

  • Page 40: Basic Recording

    ● To resume recording, press 4. Press 8 to stop recording. ● The DVD recording lamp lights off on the unit. ● It takes about 10 seconds to end the writing session when you stop recording. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 41: Recording Features

    ● There is another way to check the disc remaining time. While the unit is stopped or recording is in progress, press REMAIN. The list of disc remaining times for all recording modes appears on the TV screen. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 42 (from among “NICAM 1/MAIN”, “NICAM 2/SUB”, “MONO”) to be recorded on the disc. ( pg. 79) NOTE: Before playing back a programme recorded in stereo, or a bilingual programme, refer to “Audio Channel Selection” on page 28. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 43: Show View

    ● To cancel this setting, press SHOWVIEW or RETURN. IMPORTANT: Make sure the channel position number you wish to record is displayed; if not, see “S ® System Setup” ( pg. 82) and set the Guide Program number correctly. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 44: Manual Timer Programming

    ● To advance/go back the stop time in 30-min. increments, press and hold rt. Press w e to select “TV PROG”, then press rt to select the desired channel. Downloaded From DvDPlayer-Manual.com JVC Manuals Set the other recording options as required. ● Refer to step 6 in “S ®...

  • Page 45: On-Disc Timer Programming

    ● The current date appears on the TV screen. The date you enter appears in its place. Press w e to select “START”, then press rt to set the desired start time. Downloaded From DvDPlayer-Manual.com JVC Manuals ● Each press of rt advances/goes back the start time in 1-min. increments.
  • Page 46 Areas treated as blank cannot be played back even if they contain recorded material. NOTES: ● On-Disc Timer Programming may not always work as these examples. ● On-Disc Timer Programming may not complete successfully if the recording stop time is extended due to VPS/PDC. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 47 NOTE: When any overlaps remain after deletion and modification of programmes, Programme Check screen remains showing the conflicting programmes. In such a case, repeat the procedure above until the conflict is solved. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 48: Automatic Satellite Programme Recording (Dvd Deck Only)

    When the DVD deck is in the Automatic Sattellite Programme Recording standby mode while the VCR deck is used, the following indicator lights up instead of “SAT#” as illustrated. Automatic Satellite Programme indicator Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 49: Operations On Vcr Deck

    ● This unit is equipped with SQPB (S-VHS QUASI PLAYBACK) that lets you watch tapes recorded in the S-VHS format and the SP mode with regular VHS resolution. • SQPB does not deliver Super VHS resolution. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 50: Playback Features

    NOTE: During slow motion playback, some noise may appear on the TV screen. Press PR + or – to eliminate the noises. Index number ● When the specified index code is located, playback begins automatically. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 51 ● “VCR]” lights up on the unit. NOTES: ● Be sure to engage the DVD deck in stop mode. ● It is not possible to perform the above steps when the DVD deck is in timer standby mode. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 52: Basic Recording

    If there is a power outage during recording, Instant Timer Record safety tab Recording or timer recording ( pg. 52, 54, 55), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 53 ● To listen to the standard (Regular Monaural) audio while receiving a NICAM broadcast, press AUDIO until “NORM” appears on the TV screen. NOTE: “O.S.D.” must be set to “ON”, or the on-screen displays will not appear. pg. 53) Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 54: Show View

    ● To cancel this setting, press SHOWVIEW or PROG/CHECK. IMPORTANT: Make sure the channel position number you wish to record is displayed; if not, see “S ® System Setup” ( pg. 82) and set the Guide Programme number correctly. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 55: Manual Timer Programming

    Press w e to select “DATE”, then press rt to set the desired date. ● The current date appears on the TV screen. The date you enter appears in its place. Press w e to select “TV PROG”, then press rt to select the desired channel. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 56 ● The VCR timer lamp lights up on the unit and the DVD deck is until the conflict is solved. automatically selected. When the DVD deck is in timer standby mode, the unit is automatically turned off. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 57: Navigation (Dvd Deck Only)

    F Recording information for the programme indicated by the arrow G Guidance for operations H Operational commands The Icons and their meanings This programme is write-protected. This programme has stereo sounds. This programme has bilingual sounds. This programme was recorded with timer recording. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 58: Modify Original Information

    Press NAVIGATION to return to the normal screen. ● Press 8 to cancel pause mode after pressing NAVIGATION. Press 9 to pause playback. ● To resume normal playback, press 4. Press 8 to stop playback. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 59 Press NAVIGATION to return to the normal screen. Press rt w e to select the desired category, then press ENTER. Press ENTER. The Library Database DVD Navi screen appears again. Press NAVIGATION to return to the normal screen. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 60: Modify Play List Information

    ENTER with the arrow on “OUT”. The edit-out time is fixed. ● Press 3, 4, 5, 2, 6 or 9 to find the edit-in and edit-out points. ● The edit-out point must come after the edit-in point. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 61 B Repeat steps 5 – 8 as necessary. Press NAVIGATION to return to the normal screen. NOTE: There may be a discrepancy of several seconds between the scene you intend to edit, and the scene which is actually edited. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 62 ● When you want to cancel the order, press CLEAR (8). Press ENTER or SELECT (4) to start playback. The playback starts. Press 9 to pause playback. ● To resume normal playback, press 4. Press 8 to stop playback. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 63: Modify Library Information

    ENTER to close the prompt screen. Then perform steps 1 to 4. NOTE: If a disc registered in the library is recorded or modified on DVD units from other manufacturers, it may become impossible to operate properly. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 64: Playback With Mp3/Jpeg Navigation

    Press NAVIGATION. The MP3/JPEG Navigation screen appears. For MP3 Playback Press w e to select “MP3”. Only groups which contain MP3 files appear. For JPEG Playback Press w e to select “JPEG”. Only groups which contain JPEG files appear. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 65: Editing

    ● Dubbing is not possible on the discs used exclusively for On-Disc Timer Programming. ● If the index code is found on a tape, a single title is created. While creating a title, the dubbing stops and then starts again. REC MODE Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 66: Manual Dubbing (From Vcr To Dvd)

    ● It is not possible to perform other operations like Live Memory Playback. Check the recorded programme on the disc after dubbing. REC MODE ● Dubbing is not possible on the discs used exclusively for On-Disc Timer Programming. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 67: Disc Dubbing (From Dvd To Vcr)

    Playback. Check the recorded programme on the disc after dubbing. ● If “VCR]” lights up on the unit and you play back a DVD VIDEO disc, REC MODE the images dubbed to the VCR deck may not be output to the TV properly. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 68: Manual Dubbing (From Dvd To Vcr)

    ( ) lights off on the front display panel. REC MODE ● It is not possible to perform other operations like Live Memory Playback. Check the recorded programme on the disc after dubbing. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 69: Dv Dubbing (Dvd Deck Only)

    D Press 7 on the unit to start recording. Or press and hold 7 and press 4 on the remote control. The dubbing starts. E When the dubbing ends, press 8 on the unit, then stop playback on the external DV equipment. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 70: Edit From A Camcorder

    VCR/DVD VPS/PDC VCD REMAIN DV IN DV HS << >> S-VIDEO VIDEO (MONO) L - AUDIO - R REC MODE SLOW Recorder Audio cable (not supplied) AUDIO OUT S-Video cable S-VIDEO OUT Player (not supplied) Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 71: Edit To Or From Another Recorder

    Then, set the unit’s input mode to “F-1” in step 3, and set “F-1 INPUT” to “S-VIDEO”. ( pg. 73) (DVD deck only) 21-pin SCART cable (provided) 21-pin SCART cable (not provided) Another recorder Player Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 72: Output/Input Set (Dvd Deck Only)

    COMPONENT : If a connected appliance’s input is compatible with signals, set to “COMPONENT”. You can obtain a high- quality Y/P picture. Switch the TV to the input that you can watch component video pictures. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 73: Digital Audio Dubbing

    Stop recording on the digital audio device. Then press 8 to stop playback on the unit. NOTE: There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 74: Remote Control

    Remote control 1/2/3/4 Code Switching 0 – 9 The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (1, 2, 3 or 4). The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals.
  • Page 75 REMOTE CONTROL Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT.

  • Page 76: Connecting To A Satellite Receiver

    TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the unit to the AV mode. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 77: Connecting To A Dolby Digital Decoder Or An Amplifier With Built-In Dts

    ● Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the playback picture. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 78: Subsidiary Settings

    : The output level of analog audio is lowered. Press rt to select “AUDIO REC”, then press ENTER. Press rt to select the desired option, then press ENTER. Press SET UP to complete the setting. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 79 ● When you select “AUTO”, during playback, the operation mode disabled while the Timer mode is engaged. To disengage the timer, indicators may be disturbed depending on the type of disc being press DVD TIMER (#). used. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 80: Mode Set (Vcr Deck)

    ● When you use this unit as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting. ● During playback, the operation mode indicators may be disturbed depending on the type of tape being used. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 81 Timer Recording), and the feature will not work properly on the ● Depending on the type of TV, the top and bottom portions of following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120 superimposed displays may be cut off during NTSC playback. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 82: Tuner Set

    T-V LINK screen will appear. ( pg. 18) ● The Auto Set screen appears, and remains on screen while the unit searches for receivable stations. Wait until the TV screen as shown in step 7 appears. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 83 ● If you wish to set station names other than the ones registered in your unit, see “Set Stations (B)” ( pg. 84). ATTENTION: Guide Program numbers are not set when channels are stored Downloaded From DvDPlayer-Manual.com JVC Manuals manually. ( pg. 82, “S ® System Setup”)
  • Page 84 A Select a country in Eastern Europe in step 4 of “Auto Channel Set” ( pg. 82). B Press rt to select “TV SYSTEM” in step 5 of “Manual Channel Set” ( pg. 83). C Press rt to select appropriate TV System (D/K or B/G). Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 85: Clock Set

    Press rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER. ● The unit is preset to receive clock setting and adjustment data from channel position 1. Press SET UP to start the clock operation. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 86: Format A Disc (Dvd Deck Only)

    ● It is impossible to format Version 1.0 DVD-RW discs in Video mode. ● It is impossible to format DVD-R discs. ● All the programmes on a disc will be deleted once the disc is formatted even if they are protected titles. ( pg. 59) Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 87: Finalise A Disc (Dvd Deck Only)

    ● Although DVD-R/RW discs finalised on this unit become playable on DVD players compatible with DVD-R/RW discs, some discs still may not play, for which JVC cannot take responsibility. ● Marked points marked before finalising will be deleted, and programmes will be divided automatically into “chapters”...

  • Page 88: Scan Mode Set

    ● “VCR]” lights up on the unit. NOTES: ● Be sure to engage the DVD deck in stop mode. ● It is not possible to perform the above steps when the DVD deck is in timer standby mode. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 89: Troubleshooting

    ]Release the Parental Lock temporarily or change the set level. pg. 39) ● Lightning or static electricity may cause malfunction of the unit. ]Press 1 to turn the power off, then press the button again to turn the power on. Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 90 ● The video heads may be dirty. ]The programme may not have been recorded in its entirety. Next ]Use a dry cleaning cassette ECL-3F, or consult your JVC dealer. time make sure you have enough time on the tape to record the entire programme.
  • Page 91 ● The PC’s data recorded on a DVD-RAM drive cannot be cleared on this unit. ]Format the disc. (When the disc is soiled, wipe the disc with a soft dry cloth before formatting.) ( pg. 10, 86) Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 92 ● On-Disc Timer Programming has been attempted when a disc is not loaded, or loaded upside down. ( pg. 9, 45) DISC NOT RECORDABLE INSERT RECORDABLE DISC ● When a playback-only disc or a finalised disc is loaded, 7 has been pressed. ( pg. 6) Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 93 COPY PROHIBITED CAN NOT RECORD ● An attempt has been made to record copy-protected contents. ● An attempt has been made to record copy-once contents on a disc that is not CPRM compatible, such as DVD-R. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 94: Glossary

    A family of Standards for compressing audio-visual information. “MPEG” standards include MPEG-1, MPEG-2 and MPEG-4. Video CD and MP3 are based on MPEG-1, while DVD is based on MPEG-2. MPEG stands for Moving Picture coding Experts Group. Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 95: Specifications

    Take out the disc. After checking the disc, operate Digital audio output: the unit as usual. Optical: –18 dBm, 660 nm Coaxial: 0.7 Vp-p, 75 ohms Corresponding to Dolby Digital and DTS Digital Surround Bit stream Selectable in digital audio output setting menu Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 96: Appendix

    Burmese Tsonga Galician Nauru Tatar Guarani Nepali Gujarati Occitan Ukrainian Hausa (Afan) Oromo Urdu Hindi Oriya Uzbek Croatian Panjabi Vietnamese Hungarian Polish Volapuk Armenian Pashto, Pushto Wolof Interlingua Portuguese Xhosa Interlingue Quechua Yoruba Rhaeto-Romance Zulu Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 97 Korea, Democratic People’s Republic of Belize Georgia Korea, Republic of Canada French Guiana Kuwait Cocos (Keeling) Islands Ghana Cayman Islands Central African Republic Gibraltar Kazakhstan Congo Greenland Lao People’s Democratic Republic Switzerland Gambia Lebanon Côte d’Ivoire Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 98 Wallis and Futuna Islands Niger Sierra Leone Samoa Norfolk Island San Marino Yemen Nigeria Senegal Mayotte Nicaragua Somalia Yugoslavia Netherlands Suriname South Africa Norway Sao Tome and Principe Zambia Nepal El Salvador Zaire Nauru Syrian Arab Republic Zimbabwe Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 99 VIASAT3 France5 RTL7 RTL7 GALA GALAVISION RTLK RTLK WDR3 West3 HESSEN3 RTV4 RTV4 WRLD WORLD HSEU H.S.EURO SAT1 SAT1 YLE1 YLE1 INFO INFO-KANAL SBS6 YLE2 YLE2 ITA1 ITALIA1 SERV Service YORN YORIN ITA7 ITALIA7 ITV1 Downloaded From DvDPlayer-Manual.com JVC Manuals...

  • Page 100: List Of Terms

    ..........51 Next Function Memory ........45 On-Disc Timer Programming ............ 32 One Touch Replay ............33 On-screen bar .......... 20 On-screen Language Set ............... 23 Pan&Scan ..............60 Play List Downloaded From DvDPlayer-Manual.com JVC Manuals ..........24 Playback – –...
  • Page 101 Memo Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 102 Memo Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 103 Memo Downloaded From DvDPlayer-Manual.com JVC Manuals...
  • Page 104 Printed in Beijing Downloaded From DvDPlayer-Manual.com JVC Manuals 0304MNH-ID-BJ COPYRIGHT© 2004 VICTOR COMPANY OF JAPAN, LTD.

Table of Contents