Hitachi N 5024A2 Handling Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Power Tool
  5. N 5024A2
  6. Handling manual
Hitachi N 5024A2 Handling Manual

Hitachi N 5024A2 Handling Manual

Hide thumbs Also See for N 5024A2:
Table of Contents

Quick Links

Stapler
N 5024A2
Read through carefully and understand these instructions before use.
Keep this Manual available for others before they use the Stapler.

Handling instructions

Table of Contents
loading

Related Manuals for Hitachi N 5024A2

Summary of Contents for Hitachi N 5024A2

  • Page 1: Handling Instructions

    Stapler N 5024A2 Read through carefully and understand these instructions before use. Keep this Manual available for others before they use the Stapler. Handling instructions...

  • Page 2: General Operational Precautions

    GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING STAPLER 1. Operate the power tool safely for correct uses. Safe operation through correct usage. Do not use the power tool for uses other than those This tool was designed for driving staples into wood specified in this instructions.
  • Page 3 anyone (including yourself). Even when no staples 17. Take care when stapling thin boards or the corners are loaded at all, it is dangerous to discharge the of wood. tool while pointing it at someone, so never attempt When stapling thin boards, the staples may pass to do so.

  • Page 4: Name Of Parts

    NAME OF PARTS Exhaust Cover Piston Body Trigger Piston O-Ring Air Plug Driver Blade Nose Magazine Cover Guide Plate Lock Lever Blade Guide Magazine Assembly Staple Feeder Push Lever (A) Firing Head (outlet) Fig. 1 SPECIFICATIONS Type of power Piston reciprocating Air pressure (Gauge) 4.9 –...
  • Page 5 Check the retaining screws which fix the exhaust STAPLE SELECTION cover, etc. for tightness. Check the stapler for air leaks and defective or rusty Choose a suitable staple from Fig. Staples which are not parts. shown in Fig. can not be driven with this tool. Check whether or not the push lever works correctly.
  • Page 6 (2) Place the staple strip over the magazine. CAUTION: Make sure that the staple strip slides freely on the This tool will bounce and shoot several staples instead magazine. (See Fig. 3) of just one in rapid succession when strongly pressed flush against a surface or when using on hard materials.

  • Page 7: Inspection And Maintenance

    (1) disconnect air hose from the stapler; (2) remove all staples from the stapler; Lock Lever (3) supply 5 – 10 drops of Hitachi pneumatic tool lubricant into the air plug on the stapler; and (4) open the petcock on the air compressor tank to Blade Guide drain any moisture.
  • Page 8 6. Service parts list CAUTION: Repair, modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.
  • Page 11 SLEEVE GRIP RUBBER NYLON NUT M5 GASKET (D) HEX. SOCKET HD. BOLT M5 × 16 AIR PLUG NPT 1/4 HITACHI PLATE VALVE GUARD ROLL PIN D3 × 45 MACHINE SCREW (W/SP. WASHER) M5 × 16 HOLDER SPRING SAFETY BOLT NUT M5...
  • Page 12 Hitachi Koki Co., Ltd. Code No. C99174011 Printed in Taiwan...

Table of Contents