Table of Contents
DTC P0460 FUEL LEVEL SENSOR CIRCUIT HIGH INPUT
WIRING DIAGRAM/CIRCUIT DESCRIPTION
1. Fuel level meter in
combination meter
2. Fuel level sensor
DTC DETECTING CONDITION AND TROUBLE AREA
DTC DETECTING CONDITION
Fuel level sensor voltage higher than specified value.
DTC CONFIRMATION PROCEDURE
NOTE:
Check to make sure that the following conditions are satisfied when using this DTC CONFIRMATION PRO-
CEDURE.
D Intake air temperature: between –14 C and 70 C (6.8 F and 158 F)
D Atmospheric pressure: higher than 560 mmHg (Altitude: lower than 2790 m (9150 ft))
(1) With ignition switch OFF, connect scan tool.
(2) Turn ON ignition switch and clear DTC by using scan tool if any.
(3) Start engine and run it for 10 sec.
(4) Check DTC and pending DTC by using scan tool.
ENGINE (H25 ENGINE) 6-1-105
TROUBLE AREA
Fuel level sensor and/or its circuit
Fuel level meter and/or its circuit
ECM (PCM)
- Quick Links:
- General Information
- Engine Diagnosis
Hide quick links:
Chapters
Table of Contents
