Table of Contents

Quick Links

SIMATIC PC
Panel PC 670 V2/870 V2
Control unit
Operating Instructions
Edition 03/2004
Preface
Safety information and
general information
Description
Usage planning
Installation
Connecting
Operating
Operating and parametrizing
Maintenance and Service
Technical specifications
Appendix
1
2
3
4
5
6
7
8
9
10
11
Table of Contents
loading

Summary of Contents for Siemens 670 V2

  • Page 1 Preface Safety information and general information Description SIMATIC PC Usage planning Panel PC 670 V2/870 V2 Installation Control unit Connecting Operating Instructions Operating Operating and parametrizing Maintenance and Service Technical specifications Appendix Edition 03/2004...
  • Page 2: Edition

    Trademarks All designations marked with ® are registered trademarks of Siemens AG. Other designations in this documentation might be trademarks which, if used by third parties for their purposes, might infringe upon the rights of the proprietors.
  • Page 3: Table Of Contents

    Safety Information........................2-1 General Information ........................2-2 Operating panel guidelines ......................2-3 Description.............................. 3-1 Panel PC 670 V2: Computer unit and control unit ..............3-1 Panel PC 870 V2: Computer unit and control unit ..............3-2 Distributed Structure ........................3-4 3.3.1 Overview ............................
  • Page 4 Service ............................9-1 Maintenance and replacement parts..................9-2 Separating the control unit and the computer unit in the central design........9-2 9.3.1 Separating Panel PC 670 V2 ..................... 9-2 9.3.2 Separating Panel PC 870 V2 ..................... 9-4 Technical specifications ........................10-1...
  • Page 5 Decentralized design technical data ..................10-4 10.2 Dimensional drawings......................10-5 10.2.1 Overview ..........................10-5 10.2.2 Panel PC 670 V2 dimensions for central design ..............10-5 10.2.3 Panel PC 870 V2 dimensions for central design ..............10-6 10.3 Interfaces ..........................10-7 10.3.1 USB port...........................
  • Page 6: Edition

    Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 7: Preface

    Start up instructions and device manual are combined in the control unit operating instructions. The structure of the document was standardized: Heading and numbering of the main chapter describe the main steps in their processing sequence. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 8 SIMATIC Panel PC 870 V2, QuickStart with the following information: – Starting up – Legal notes • SIMATIC Panel PC 670 V2 control unit device manual, SIMATIC Panel PC 870 V2, control unit operating instructions with the following information: – Operation –...
  • Page 9 Trademarks All designations bearing the ® trademark symbol are registered trademarks of Siemens AG. All other designations in this documentation are trademarks, whose use by third parties for their own purposes might infringe on the rights of the owner.
  • Page 10: Further Support

    Preface 1.2 Further Support Further Support Representatives and offices Please consult your Siemens representative at the office nearest you for any other questions regarding the use of the products described in the manual. Locate your representative at: http://www.siemens.com/automation/partner Training Centers Siemens offers a number of training courses to familiarize you with the automation system.
  • Page 11 Fax: +86 10 64 74 74 74 E-Mail: E-mail: E-mail: [email protected] [email protected] [email protected] GMT: +1:00 GMT: -5:00 GMT: +8:00 Information available in German and English. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 12 Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 13: Safety Information And General Information

    Replace lithium batteries with the same brand or a brand recommended by the manufacturer. Dispose of used lithium batteries individually as hazardous waste in accordance with the local regulations. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 14: General Information

    Before transporting the device, wait at least 20 seconds to allow the drive to stop completely. Updates Regularly check if hotfixes for your device are available at the Siemens Internet site. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 15: Operating Panel Guidelines

    The panel of the control unit is only partially resistant to chemicals. More information is available in the internet at "www.ad.siemens.de" under the heading "Products & Solutions." Click on "Service & Support" under "Services" and look for the article-ID "16532108" on the "Product Support"...
  • Page 16 Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 17: Description

    The computer unit is connected to the control unit by screws. Operating unit Computing unit Figure 3-1 Panel PC 670 V2 as a complete device with central design Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 18: Panel Pc 870 V2: Computer Unit And Control Unit

    • Decentralized design: Computer unit and control unit are in separate locations. Principle In the central design, the computer is screwed to the back of the control unit with two mounting rails. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 19 • Function keys and softkeys • Integrated mouse LEDs for power supply, temperature, softkeys, and keys • • Front-mounted USB 1.1 port for connecting external I/O modules Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 20: Distributed Structure

    The control unit and the computer unit are installed in separate locations. Computing unit Direct key module (optional) Power supply Receiver cable Transmitter (fitted) Interconnecting cable USB cable Operating Unit Figure 3-3 Decentralized design overview Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 21: Configuration

    12" keyboard variant 6AV7671-3CA00-0AA0 for 15" keyboard variant 6AV7671-5CA00-0AA0 The printing templates for the labelling strips can be obtained from the internet address in the preface. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 22 Cable connector at the computer unit Cable connector at the control unit Connector type 15pol. Sub-D male connector 15pol. Sub-D jack plug Connector design 45° angle straight Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 23: Usage Planning

    2. If any transport damage is present at the time of delivery, lodge a complaint at the shipping company in charge. Have the shipper confirm the transport damage immediately. 3. Unpack the device. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 24: Make Note Of Identification Data

    "A5E," and the version of the device. in the table. This data is located on the rating label on the edge of the side of the control unit. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 25 SVP number Order number of the computer unit Power supply version — Approbation — Model designation Serial number Control unit order number Device version Ethernet address Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 26: Guidelines For Handling Electrostatic Sensitive Devices (Emc)

    Isolate the power supply to the switch cabinet before opening it. Make sure that the power to the switch cabinet cannot be turned on accidentally. Caution The device is approved for use in closed areas only. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 27 If the device is installed in an unapproved position, the licenses expire in accordance with UL 508 and EN 60950! For additional information, refer to the dimension diagrams in the appendix. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 28: Approved Installation Positions

    Applies only to the control unit: Figure 4-4 Approved installation positions for decentralized design Vertical installation and deviations between +70° and -20° in the given directions is permissible. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 29: Method Of Attachment

    The following applies to the complete device in the central design and the control unit in the decentralized design. Requirement The degree of protection suitable to the field of application and thereby the method of attachment have been selected. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 30 Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 31: Dimensions

    The following illustrations depict the installation dimensions of the complete device in the central design. Figure 4-5 Drill holes for the screws and pressure points for the clamp screws L4, L5: Drill holes with 6mm diameter each Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 32 Usage planning 4.6 Recessed mounting cut-out Figure 4-6 Installation diemsnions of the control unit without CD-ROM drive Panel PC 670 V2/870 V2, Control unit 4-10 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 33 The respective dimensions are dependent on the control unit. Figure 4-7 Dimensions of the control unit with attached remote module and direct key module Panel PC 670 V2/870 V2, Control unit 4-11 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 34 Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 35: Installation

    4. Applies only to the decentralized design: Mount the computer unit at at its planned installation location. For additional information, please refer to computer unit operating instructions. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 36: Securing With Screws

    4. Insert the device or the control unit in the decentralized design into the recessed mounting cut-out from the front. 5. Secure the control unit by inserting suitable screws through the holes and attaching nuts. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 37 6. Applies only to the decentralized design: Install the computer unit at its planned installation location. For additional information, please refer to the computer unit operating instructions. Figure 5-3 Drill hole covers Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 38: Connecting

    For additional information, refer to the technical data. Please refer to the chapter "Starting up" in the computer unit operating instructions for more information concerning the connection of a USB device. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 39: Other Interfaces

    • The display cable K2 connects the display of the control unit with the computer unit. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 40: Connecting A Decentralized Design

    The remote module has a AC 110/230V power supply. The remote module is also available with a DC 24 V power supply. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 41: Equipotential Bonding

    When cable shields are applied on both sides and are grounded at different system parts, for example. Causes of potential differences are different network feed-ins, for example. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 42: Connecting Equipotential Bonding

    Please follow the described guidelines concerning equipotential bonding. Otherwise interface components will be damaged or destroyed. 1. Connect the device to the equipotential bonding as illustrated in the chapter "Connecting a decentralized design." Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 43: Connecting The Computer Unit-Control Unit Connecting Cable

    Caution Connect the device with DC power supply only to 24V power supply networks which comply with the requirements of a secure low voltage SELV. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 44: Block Diagram

    1. Attach the supplied power supply cable into the AC/DC power supply connector of the control unit. Applies only to the Panel PC 670 V2: When the computer unit is supplied with electricity through the power supply connection, the device is in operation and begins to boot.
  • Page 45: Operating

    The following illustration shows as an example the front view of the 12" variant with the display, the operating mode display, the individual keypads, the integrated mouse and the front-sided USB 1.1 port. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 46: Keyboard

    Activating a key using a hard object, e.g. a screwdriver, reduces the life of the key. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 47 Each key has an integrated LED. Figure 7-2 Function keys and softkeys Control keys The control keys activate editing functions and control functions in different applications: Figure 7-3 Control keys Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 48 Enter the numerals "0" to "9" and special characters, e.g. the decimal point, using the pre- defined assignment of the numeric keys. Figure 7-5 Numeric keys Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 49: Labelling Function Keys And Softkeys

    Label the function keys and softkeys to conform with the project. Labeling without reference to a project leads to incorrect operations on the system to be observed. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 50: Integrated Mouse

    The amount of pressure determines the speed of the cursor. As an alternative, connect an external mouse at the USB 1.1 port. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 51: Operator Controls Of The Touch Screen Panels

    As an example, the following illustration shows the front view of the 15" variant with the status displays, the front-sided USB 1.1 port, and the display. Figure 7-8 Example of a 15" control unit with touch screen panel Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 52: Touch Screen

    • Using a plastic pen with a 1 mm radius at the point: 25 g. • Using a silicone finger with a diameter of 1.6 cm: 50 g. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 53: Operating And Parametrizing

    Do not switch off the device during the start up. Otherwise parts of the software will be lost which are necessary for trouble-free operation. Use the default values in the BIOS. Otherwise the operating system will not be installed properly. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 54: Turn On Device

    After connection to the power supply, the device performs a self test. During the self test, the message "Press to enter SETUP" appears briefly. When the self test is finished, the operating system will be loaded. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 55: Setting Up Microsoft Windows Operating System

    Note The dialogs overlap themselves. In order to change from one dialog to another, press the key combination +. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 56 2. Click on the button with the screen size and screen resolution which matches your device. Figure 8-1 Setdisplay 3. Change to the "Panel PC selector" dialog. 4. Select the model of your device. Figure 8-2 Panel PC selector Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 57 The next two steps apply to control units with touch screen panels: After the computer unit is restarted, the "Touch screen calibration" dialog will appear. Carry out the following steps carefully: Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 58 Applies only to the raid system option: The application "Raid promise monitor" will appear after every restart of the computer unit. For additional information, please refer to the chapter "Functions" in the computer unit operating instructions. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 59: Normal Operation

    "Additional drivers and applications." • The proper ambient and environmental conditions according to the technical data for the device and the connected I/O modules have been observed. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 60: Turning Off The Device

    Applies to the decentralized design: When the computer unit is turned off or the operating system session has been exited, the display is always white. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 61: Additional Drivers And Applications

    No warranty can be provided for other software. The following illustrations of drivers and applications refer to the Panel PC 870 V2. The corresponding software for the Panel PC 670 V2 differs slightly from these illustrations in some places.
  • Page 62 • Start menu "Start", command "Settings > Control panel > MicroTouch Touchscreen" Procedure 1. Start the touchware settings 2. Switch to the "Touch settings" tab control. The following dialog will appear: Panel PC 670 V2/870 V2, Control unit 8-10 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 63: Repeating Calibration

    1. Start the touchware settings as described in the last section. 2. Switch to the "Touch settings" tab control. The following dialog will appear: Panel PC 670 V2/870 V2, Control unit 8-11 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 64 5. Click on the "Options" button. The "MicroTouch Touchscreen Options" dialog will appear. 6. Click on the "Advanced" button. The following dialog will appear: Figure 8-8 Advanced touchscreen settings dialog Panel PC 670 V2/870 V2, Control unit 8-12 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 65: Keytools

    The following applies to Windows 98, Windows NT, Windows 2000 and Windows XP. Start Start menu "Start", command "Settings > Control panel > SIMATIC Key Tools" Panel PC 670 V2/870 V2, Control unit 8-13 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 66: Keyhook

    Start menu "Start", command "Settings > Control panel > Keyboard," Tab control "KeyHook." Panel PC 670 V2/870 V2, Control unit 8-14 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 67: Keypad

    The following applies to devices which have a key panel and no "KeyTools" at their disposal. The following section applies to Windows 98, Windows NT, Windows 2000 and Windows XP. Panel PC 670 V2/870 V2, Control unit 8-15 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 68 File 10" c:\drivers\keypad\keypads10.exe 12'' c:\drivers\keypad\keypads12.exe 15'' c:\drivers\keypad\keypads15.exe Function Using "Keypad," the preset key assignments for the membrane keyboard can be changed. Figure 8-11 Keypad Panel PC 670 V2/870 V2, Control unit 8-16 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 69: Simatic Som Safecard On Motherboard

    "TouchInputPC" symbol on the desktop. Function TouchInputPC provides a screen keyboard. On the screen keyboard, the characters are entered directly on the touch screen or with the mouse. Panel PC 670 V2/870 V2, Control unit 8-17 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 70: Set Brightness

    The intensity of the backlighting is adjusted using "Set brightness." Figure 8-14 Set brightness 8.3.10 CheckLanguageID Area of validity The following applies to Windows 2000 Multi-Language and Windows XP Multi-Language. Start c:\drivers\checklang\checklangid.exe Panel PC 670 V2/870 V2, Control unit 8-18 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 71: Installing User Interface Language

    Install the required user interface languages using the "Multilanguage User Interface." The installed user interface languages and the standard user interface language will be displayed. Panel PC 670 V2/870 V2, Control unit 8-19 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 72: Changing User Language

    Applications have language-specific dialogs. Using the relevant system language, foreign text in dialogs will be displayed in the respective native language if the application supports the system language. Panel PC 670 V2/870 V2, Control unit 8-20 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 73 Procedure 1. Open the "Regional settings" dialog box. The following dialog will appear: Figure 8-17 Regional settings dialog Panel PC 670 V2/870 V2, Control unit 8-21 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 74: Changing The Standard Language

    If the standard languages and standard input languages are not selected as described, applications will not represent the characters properly, e.g. in Asian languages. Panel PC 670 V2/870 V2, Control unit 8-22 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 75: Dvd Rom / Cd Rw

    CD-drives, the use of Disc at once and Track at once is recommended. Reads DVD ROM, CD ROM, CD-R and Video CD. Panel PC 670 V2/870 V2, Control unit 8-23 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 76: Usb Keyboard Controller Driver And Usb Stack

    In order to use the USB keyboard controller driver under Windows NT, install the USB stack 4.2. The setup program installs the USB stack and the USB keyboard controller driver. Panel PC 670 V2/870 V2, Control unit 8-24 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 77: Maintenance And Service

    2. Dampen the cleaning cloth. 3. Spray the cleaning agent on the cloth and not directly on the device. 4. Clean the device with the cleaning cloth. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 78: Maintenance And Replacement Parts

    The section applies to the central design. Introduction The control unit is separated from the computer unit to carry out repairs or replace the control unit, for example. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 79 Figure 9-1 Swinging the computer unit away from the control unit, as seen from above Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 80: Separating Panel Pc 870 V2

    The section applies to the central design. Introduction The control unit is separated from the computer unit to carry out repairs or to replace the control unit, for example. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 81 Figure 9-3 Swinging the computer unit down away the control unit, as seen from above Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 82 Lay a pad under the computer unit as illustrated so that the computer does not fall out and bend the lugs. Installing the device To reinstall the device, follow the reverse procedure. Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 83: Technical Specifications

    A Immunity to magnetic fields IEC 61000-4-8 50/60 Hz, 30 A/m effective value The ESD immunity of PC cards 4 kV for contact discharge Panel PC 670 V2/870 V2, Control unit 10-1 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 84: Central Design Technical Data

    3) Additional installation depth mit CD-ROM drive + 20 mm = + 0.79 inches Information concerning resistance to chemicals is located in the section "General Information." Panel PC 670 V2/870 V2, Control unit 10-2 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 85: Ambient And Environmental Conditions

    5 ... 95 % at 25 °C (+77 °F) Tested according to IEC 60068-2-3, IEC 60068-2-30, IEC 60068-2-56 Temperature change Maximum 10 K/h Condensation not permissible Supply air No corrosive gases Panel PC 670 V2/870 V2, Control unit 10-3 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 86: Decentralized Design Technical Data

    PU, flame-retarding to IEC 60 332.1 Oil-resistant to VDE 0472 Part 803, Test category B Order no. 10 m 20 m 6XV1440-7AH20 6XV1440-7AH50 6XV1440-7AN10 6XV1440-7AN20 Panel PC 670 V2/870 V2, Control unit 10-4 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 87: Dimensional Drawings

    If a CD-ROM drive or a CD-RW-/DVD drive is installed in the computer unit, the installation depth must be enlarged by 21 mm. Figure 10-1 Dimensions of the Panel PC 670 V2 in central design without CD-ROM drive Panel PC 670 V2/870 V2, Control unit 10-5...
  • Page 88: Panel Pc 870 V2 Dimensions For Central Design

    If a CD-ROM drive or a CD-RW-/DVD drive is installed in the computer unit, the installation depth must be enlarged by 21 mm. Figure 10-2 Dimensions of the Panel PC 870 V2 in central design without CD-ROM drive Panel PC 670 V2/870 V2, Control unit 10-6 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 89: Interfaces

    Change the key codes using the "KeyTools." Key number Code Key label 41/s F20 (Shift F8) 24/s & 20/s 1e/s Panel PC 670 V2/870 V2, Control unit 10-7 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 90 20a1 33/AS ° 21a1 31/s ’ 22a1 23a1 30/s 24a1 2f/s 3e/s F17 (Shift F5) 27a1 22/s 28a1 22/A (Euro) 29a1 21/s 30a1 33/s Panel PC 670 V2/870 V2, Control unit 10-8 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 91 (BLANK) 46a1 2d/s 48a1 1f/s 3b/s F14 (Shift F2) – 51a1 52a1 (Backspace) 3a/s F13 (Shift F1) (CURSOR UP) (PAGE UP) (PAGE DOWN) (INSERT) Panel PC 670 V2/870 V2, Control unit 10-9 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 92 /s SHIFT transmitted also 41/s /a ALT transmitted also 34/a /as ALT+SHIFT transmitted also 33/as /c CTRL transmitted also 3a/c,5 Panel PC 670 V2/870 V2, Control unit 10-10 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 93: Appendix

    • ESD:components suceptible to ElectroStatic Discharge • ESD: internationally recognized marking for components and modules susceptible to electrostatic discharge Panel PC 670 V2/870 V2, Control unit 11-1 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 94 10 cm to screens. Handle flat components only by their edges. Do not touch component connectors or conductors. This prevents charges from reaching and damaging sensitive components. Panel PC 670 V2/870 V2, Control unit 11-2 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 95 In ESD components containing installed batteries, make sure that the conductive packaging does not touch the battery connectors or short circuit. Insulate the connectors with suitable material. Panel PC 670 V2/870 V2, Control unit 11-3 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 96: Abbreviations

    Point to Point Interface SIMATIC S7 PS/2 Personal System 2 Programmable Logic Controller Device depth TCP/IP Transmission Control Protocol/Internet Protocol Universal Serial Bus Video Graphics Array Panel PC 670 V2/870 V2, Control unit 11-4 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 97: Glossary

    As an alternative, connect printers with a serial interface. Controller Installed hardware and software which control the functions of specific internal or external devices, e.g. the keyboard controller. Panel PC 670 V2/870 V2, Control unit 11-5 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 98 An image is, for example, an image of hard disk partitions. Save the image in a file in order to restore it as needed. Interface See Interface. Panel PC 670 V2/870 V2, Control unit 11-6 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 99 V.24 interface The V.24 interface is a standardized port for data transfer. Connect printers, modems, and other hardware components to the V.24 interfaces. Panel PC 670 V2/870 V2, Control unit 11-7 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 100 Panel PC 670 V2/870 V2, Control unit Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 101 6-3 Display cable, 6-2 Power supply, 6-6 Equipotential bonding cable, 6-5 Connecting cable, 3-5, 3-6, 6-6, 6-7, 9-2 I/O USB cable, 6-2 Panel PC 670 V2/870 V2, Control unit Index-1 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 102 Panel PC 870 in the central design, 10-6 Glossary, 11-5 Direct key module, 3-5, 6-3, 10-2 Display, 2-3, 3-2, 3-3, 3-4 TFT-LC display, 2-3 Documentation, 1-2 Heat dissipation, 10-3 Panel PC 670 V2/870 V2, Control unit Index-2 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 103 Operating Mode, 3-2, 3-3, 3-4 Keypad, 8-16 Operator controls, 7-1, 7-7 Knurl screw, 9-3, 9-5 For touch screen panel, 7-7 On the key panel, 7-1 Options, 3-5 Panel PC 670 V2/870 V2, Control unit Index-3 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 104 Temperature change, 10-3 Safety Information, 2-1 Temperature limit value, 10-3 Safety requirement, 10-3 Temperature threshold, 7-1 Scope of service, 9-1 TFT technology, 3-2, 3-3 Panel PC 670 V2/870 V2, Control unit Index-4 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 105 Touch screen, 7-8 V.24 interface, 11-7 Weight, 10-2, 10-4 Central design, 10-2 Distributed configuration, 10-4 Windows NT, 8-24 Writing down, 4-2 Identification data, 4-2 Panel PC 670 V2/870 V2, Control unit Index-5 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...
  • Page 106 Index Panel PC 670 V2/870 V2, Control unit Index-6 Operating Instructions, Edition 03/2004, CD Documentation and Drivers...

This manual is also suitable for:

870 v2

Table of Contents