D-Link DGE-530T Quick Installation Manual

Check Your Package Contents

DGE-530T

DO NOT insert the DGE-530T into the computer's PCI

Installing the DGE-530T Drivers

A.

Insert the driver CD, which is included with the DGE-530T, into the CD-ROM of your

computer.

B.

Choose the preferred language and click on "Install Drivers". When prompted "Installation

Complete", click OK. If prompted to restart (for Microsoft Windows 98/ME only), click "Yes".

Installing the DGE-530T into the computer's PCI slot

A.

Power off your computer and disconnect the power cord.

B.

Remove the back cover of your computer. (Refer to your computer's manual if needed.)

C.

Locate an available PCI slot. PCI slots are usually white or cream coloured.

D.

Remove the back plate (the small piece of metal that covers the opening for the PCI card

on the back cover that you just removed.)

E.

Insert the DGE-530T carefully and firmly into the PCI slot.

Gigabit PCI Desktop Adapter

slot before installing the drivers.

Next, TURN OFF the computer and unplug

the power cord.

Caution: To avoid damage caused by static electricity, make sure to properly

ground yourself by first touching a metal part of your computer to discharge any

static electricity before working with the DGE-530T Ethernet Adapter.

DGE-530T

CD with Manual and Drivers