Table of Contents
Quick Links
LCD FLAT PANEL HDTV
MODELS
133 Series
LT-40133, LT-46133, LT-52133
134 Series
LT-40134
144 Series
LT-46144, LT-52144
OWNER'S GUIDE
•
For questions:
-
Visit our website at www.mitsubishi-tv.com.
-
E-mail us at [email protected].
-
Call Consumer Relations at 800-332-2119.
•
For information on System Reset, please see the back cover.
•
To order replacement (additional) remote controls or Owner's Guides, visit our website at
www.mitsuparts.com or call 800-553-7278.
•
Guidelines for setting up and using your new widescreen TV start on page 13.
D A I L Y
x.v.Color
Table of Contents
Related Manuals for Mitsubishi Electric LT-40133
Summary of Contents for Mitsubishi Electric LT-40133
- Page 1 LCD FLAT PANEL HDTV MODELS 133 Series LT-40133, LT-46133, LT-52133 134 Series LT-40134 144 Series LT-46144, LT-52144 OWNER’S GUIDE • For questions: Visit our website at www.mitsubishi-tv.com. E-mail us at [email protected]. Call Consumer Relations at 800-332-2119. • For information on System Reset, please see the back cover.
-
Page 2: Fcc Declaration Of Conformity
WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. FCC Declaration of Conformity Product: LCD HDTV Display Models: LT-40133, LT-46133, LT-52133 LT-40134 LT-46144, LT-52144 Responsible Mitsubishi Digital Electronics Party: America, Inc. -
Page 3: Table Of Contents
Contents Important Information About Your TV TV Guide Daily Access Requirements (model LT- 40134 only) ......Installation Notes . -
Page 4: Important Information About Your Tv
TV Guide Daily Access Requirements (model LT-40134 only) TV Guide Daily listings are not provided by Mitsubishi Digital Electronics America, Inc. Operation of TV Guide Daily requires over-the-air or direct cable (no cable box) access to stations carrying TV Guide Daily program list- ings. -
Page 5: Important Safeguards
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. Read, Retain and Follow All Instructions. Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. -
Page 6: Cable Management
Cable Management All models come with (2) cable ties and (1) cable clamp that help keep cables properly organized and con- nected. This is especially important when the manual swivel feature is used. The TV comes with (1) Cable Tie already attached (see illustration below). -
Page 7: Stand Removal Instructions
To order a Wall Mounting Kit, please contact Peerless Industries, Inc. at (800) 473-3753 or visit www.peerless- mounts.com. • For TV Models LT-40133 and LT-40134, use wall mounting kit Model ST635. • For TV Models LT-46133, LT-46144, LT-52133, and LT-52144, use wall mounting kit Model ST650. -
Page 8: Television Overview
Television Overview Package Contents Please take a moment to review the following list of items to ensure that you have received everything. 1. Remote Control 2. Two AA Batteries 3. Owner’s Guide 4. Quick Reference Guide 5. Quick Connect Guide 6. -
Page 9: Tv Front Panel
NetCommand for HDMI Devices (all models) Some newer HDMI devices may be compatible with the TV’s NetCommand for HDMI feature. Compatible devices can receive control signals through the HDMI connection. The TV’s remote control may be able to operate some functions of these devices without any further setup. -
Page 10: Tv Side Panel
TV Side Panel The side panel contains TV control buttons and addi- tional input jacks. System Reset Button (see more information below) See chapter 4, Side Panel “TV Operation Buttons. and Features” (duplicates some of the keys on the TV remote control) Side Panel Jacks. -
Page 11: Tv Back Panel
TV Back Panel TV Back Cover Label for Back Panel #2 Back Panel #2 ANT 2/AUX ANT 1/MAIN LT-40134, LT-46144, and LT-52144 models only 1. ANT 1/MAIN, ANT 2/AUX (Antenna) If you are connecting an antenna or direct cable without a cable box, connect the main antenna or cable source to ANT 1/MAIN. - Page 12 TV Back Panel, continued 5. INPUT 1, 2 (Audio and Video) INPUT 1 and 2 can be used to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other A/V device to the TV. Each TV INPUT group consists of jacks for composite video, S-Video, and analog stereo audio.
-
Page 13: Tv Setup
TV Set-Up Guidelines for Setting Up and Using Your New Widescreen TV Getting Started 1. Review the important safety, installation, and oper- ating information at the beginning of this book. 2. Choose a location for your TV. • Allow at least four inches of space on all sides of the TV to help prevent overheating. -
Page 14: Installing The Remote Control Batteries
Parental Locks. Restrict TV viewing (by • program rating, by channel, or by time of day) and disable side panel controls. See the Lock > Parent menu, the Lock > Side Panel menu, and Setup > Edit > Lock. Video Settings. Change video adjustments to •... -
Page 15: Setting Up Tv Inputs
Initial TV Setup, continued Change the Menu Language Choose to display on-screen menus in either English or Spanish (Español). Select a menu language in the Setup menu. 1. With the Setup menu displayed, press light the Language icon. to highlight either English or Spanish. 2. -
Page 16: Controlling A/V Receiver Sound Volume
Setting Up TV Inputs, continued 1. See chapter 3, “TV Connections,” for recommen- dations on connecting your devices. 2. Connect your devices to the TV, making note of which TV input is used for each device. The TV and the devices can be either on or off when connecting. -
Page 17: Using The Tv With A Personal Computer
Using the TV with a Personal Computer Connecting a Computer to the TV Use one of the connection methods listed below based on your computer’s video output. Computer Video Connection Video Output Digital DVI DVI-to-HDMI cable or an HDMI cable with an HDMI-to-DVI adapter Note: If the computer’s audio output is a single mini jack, a mini audio-to-RCA-male “Y”... -
Page 18: Computer Display Formats
Using the TV with a Personal Computer Computer Video Adjustments 1. Power on the computer if it is not already on. 2. Select PC from the Input Selection menu. To do this, press INPUT to open the Input Selection menu, move the highlight to the PC icon, and press ENTER. -
Page 19: Tv Connections
TV Connections Before you Begin Auto Input Sensing The TV’s Auto Input Sensing feature automatically rec- ognizes most connections and prompts you to identify the type of device connected. See chapter 2, “TV Setup,” for more on Auto Input Sensing. Connection Types Review the connection types available on your input devices and use inputs that will give the best video... -
Page 20: Hdmi Device (Cable Box, Satellite Receiver, Dvd Player, Or Other Device)
HDMI Device (Cable Box, Satellite Receiver, DVD Player, or Other Device) Required: HDMI-to-HDMI cable. Connect an HDMI cable from the TV back panel #2 to the HDMI device output. HDMI devices provide video and audio through the single cable. Mitsubishi recommends you use category 2 HDMI cables to connect HDMI 1.3 source devices. -
Page 21: Direct Cable (No Cable Box)
Direct Cable (no cable box) It is very important to connect the incoming Cable-TV cable directly (no cable box) to ANT 1/MAIN. Connect the primary incoming coaxial lead cable to ANT 1/MAIN on the TV back panel #2. 2. For an optional secondary antenna source, connect an antenna (or cable) to ANT 2/AUX. -
Page 22: Dvd Player With Component Video
DVD Player with Component Video Component video cables and analog audio cables are required. 1. Connect the component video cables from Y Pb Pr VIDEO OUT on the back of the DVD player to the COMPONENT INPUTS jacks on the TV back panel #1, matching the green, blue, and red colored con- nections. -
Page 23: Vcr To An Antenna Or Wall Outlet Cable
VCR to an Antenna or Wall Outlet Cable Required: Two-way RF splitter, 3 coaxial cables, right and left analog audio cables, either S-video or video cable. Connect the incoming cable or antenna to IN on the RF splitter. 2. Connect one coaxial cable from OUT on the RF splitter to ANTENNA IN on the VCR back panel. -
Page 24: Vcr To A Cable Box (Audio & Video)
VCR to a Cable Box (Audio & Video) Required: Two coaxial cables, right and left audio cables, S-Video or composite video cable, plus cables required to connect the TV to the cable box. Connect the incoming coaxial cable to CABLE IN on the cable box. -
Page 25: A/V Receiver (Sound System)
A/V Receiver (Sound System) Most setups require either a digital audio cable or analog stereo audio cables. The TV makes all audio available in digital and analog formats: Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUTPUT jack (TV back panel #2). -
Page 26: Camcorder
Camcorder Inputs on the side of the TV offer the most convenient way to connect a camcorder. If your TV model does not have a side input matching the camcorder’s output, use one of the matching jacks on the back of the TV. Jacks on the TV side panel offer the most convenient way to... -
Page 27: Tv Operation And Features
TV Operation and Features Choosing a Viewing Source Input Selection menu Choose a viewing source from the Input Selection menu. The current TV input appears as a full-color icon in this menu. Press INPUT to display the Input Selection menu. If there are only two inputs to the TV, INPUT switches between them without displaying the menu. -
Page 28: Remote Control
Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be con- trolled by the remote control. Set the slide switch to TV for operation of the TV and NetCommand- controlled devices. Control of additional devices requires programing (see Appendix D, “Program- ming the Remote Control.”... -
Page 29: Channelview™ Channel Listings
Remote Control, continued Record/Playback Keys Use any of these methods to enable the recording and playback commands: • Program the remote control for your DVR, VCR, or DVD player/recorder and set the slide switch to VCR, DVD, CABLE/SAT, or AUDIO as appropriate. •... -
Page 30: Status Display
Status Display Press the INFO key to see the on-screen status display. The most common displays are shown here. Seldom or never do all the status indi- cators appear at the same time. On-screen status display. Sample information shown for a digital program source. Analog Sources Source antenna or input Analog channel being received (antenna sources only) -
Page 31: Fav (Favorite Channels)
Fav (Favorite Channels) Use the six Fav channel banks to store groups of your favorite channels from ANT 1 and ANT 2. You can set up a Fav channel bank for each of your favorite program types or set up a bank for each TV user. You may prefer to perform Fav channel setup from a menu. -
Page 32: Tv Signals And Display Formats
TV Signals and Display Formats This is a widescreen TV, also known as a 16:9 TV. This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow-screen images (called 4:3 aspect ratio) you will encounter. - Page 33 4. TV Operation and Features TV Display Formats See descriptions on the preceding page.
-
Page 34: Viewing Camera Files
Viewing Camera Files JPEG Photos and the USB Photo Port 1. Connect your digital camera or USB drive to the USB Photo port on the side of the TV. If using a camera, power it on and set it to playback mode. The USB Photo menu displays while files are still being read. -
Page 35: Photos And Moving Video As Composite Video
Slide Show Use these keys during the slide show: Keys for JPEG Picture Slide Show Begin or resume slide show playback Pause or resume playback while in auto- matic advance mode. Advance to the next slide. ENTER Go to the previous slide. FORMAT Rotate the slide clockwise in 90˚... -
Page 36: Tv Menu Settings
TV Menu Settings Main Menu Press MENU on the remote control to open the Main menu. Icon Menu Name and Description AV Menu Captions Menu Setup Menu Inputs Menu Lock Menu Remote Control Keys for the TV Menu System The following keys help you use the menu system. Some keys are duplicated on the TV’s side panel. MENU EXIT (Adjust Left/Right Keys) •... -
Page 37: Av Menu
AV Menu An on-screen slider displays when making some audio and video adjustments. Numeric values represented on the slider range from 0 (minimum) to 63 (maximum), with 31 as the mid-point. Important: You should name the input before you adjust the Audio/Video settings. These settings are returned to default when change the input name. -
Page 38: Video Menu
Video Menu To make video adjustments: • From the Video menu: 1. Press to highlight an option 2. Press to make an adjustment 3. Press MENU to return to the AV menu. • While watching TV: Press the VIDEO key repeatedly to display the video option you want to change. -
Page 39: Audio Menu
Audio Menu To make audio adjustments: • From the Audio menu: 1. Press to highlight an option. 2. Press to display the submenu and adjust. 3. Press MENU to return to the AV menu. While watching TV: Press the AUDIO key repeatedly •... -
Page 40: Captions Menu
Captions Menu Captions on Analog Channels The TV can decode captions from ANT 1/ANT 2 and INPUT 1/INPUT 2. Broadcasters can send either stan- dard closed captions or text service. Standard closed captions follow the dialogue of the program and display in a small section of the screen. -
Page 41: Setup Menu
Setup Menu Use the Setup menu to: • Select English or Spanish for menus and on-screen text. • Scan the channels available for the antenna or cable service connected to the ANT 1 or ANT 2 jacks. • Edit channel options, including channel locking. •... - Page 42 Setup Menu, continued Setup Menu Options Use the Edit menu to edit channel options when ANT 1 or ANT 2 is the current source, To highlight a channel number to edit: Press CH/PAGE • Edit speed through pages. • Press to move through all channel numbers, one at a time.
- Page 43 Setup Menu, continued Use either the manual or auto method to set the clock. Set the clock if you wish to: • Use the TV’s Timer function. • Maintain accurate ChannelView listings. Setup Menu Options Settings Clock Time (Manual option only) Date (Manual option only)
- Page 44 Setup Menu, continued Use the Timer to set a time for the TV to turn on auto- matically. Use this menu to set a day, time, input, and channel for the Timer. If the TV is already on at the requested time, the TV will automatically tune to the designated channel.
-
Page 45: Inputs Menu
Inputs Menu Note: • NetCommand IR control of home theater devices is available on LT-40134, LT-46144, and LT-52144 models only. • When you change an input name in the Name menu and then exit the Name menu: The name is changed The icon in the Input Selection menu is changed Audio/Video settings are changed to the defaults for the new device type. - Page 46 Set Up TV Guide Daily Setup of the TV Guide Daily system is optional. 1. Display the Inputs > Guide menu to display TV Guide Daily setup options. 2. To enable the TV Guide Daily system, highlight On. If you wish to disable the system, highlight Off. Inputs >...
-
Page 47: Lock Menu
Lock Menu TV locks available from the Lock menu are: Lock by Ratings Parent Restrict access to programming based on V-Chip rating signals sent by the broadcaster. Other Lock by Time Time Restrict TV use by time of day. Lock Side Panel Disable the controls on the side Side panel of the TV. - Page 48 Lock Menu, continued Parent Menu Options (U.S.-based rating system) Option Name and Description Lock Off, On Disables or enables program blocking based on V-Chip signals and the U.S. rating system. TV-Y Youth. For children under 7. Rating TV-Y7 Youth 7 and older. TV-G General Audience.
-
Page 49: Side Panel
Lock Menu, continued Other Menu Options (alternate rating system) This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply to digital programming only. -
Page 50: Netcommand
NetCommand About NetCommand • This chapter applies to LT-40134, LT-46144, and LT-52144 models only. • The IR “Learning” feature of NetCommand allows the TV to learn the remote control signals for your A/V devices • NetCommand setup is optional. • You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward. -
Page 51: Ir Emitter Placement (Netcommand)
IR Emitter Placement (NetCommand) An IR emitter cable is included with LT-40134, LT-46144, and LT-52144 TV models only. The NetCommand system uses emitters connected to the IR EMITTER jack to control other devices such as DVD players, cable boxes, satellite receivers, and VCRs. Connect the plug end of the supplied IR emitter cable to the IR EMITTER NetCommand TV back panel #2 (in recessed area). -
Page 52: Initial Netcommand Setup For Most Devices
Initial NetCommand Setup for Most Devices To perform this procedure, you need: • The remote controls for both the TV and the device you want to control. • The IR emitter cable supplied with the TV. Note: To set up an A/V receiver, see “Set Up NetCommand Control of an A/V Receiver”... -
Page 53: Netcommand Specialized Device Keys
NetCommand Specialized Device Keys Refer to this chart when “learning” device keys. “Learn” some, all, or none of the keys used for each device type. The chart has space for you to write in functions you assign to the F1–F4 keys. Key Name in Function Learning Screen... -
Page 54: Operating Netcommand-Controlled Devices
Operating NetCommand-Controlled Devices To Control Most Device Types As an example of NetCommand control, if you are watching your cable box and you wish to tune to the next channel higher, press CH/PAGE then sends the “learned” channel-up control signal to the cable box. - Page 55 Operating NetCommand-Controlled Devices, continued Key Name in Special Operation Description and Setup Learning Screen Guide Displaying the Disc Menu (DVD or high-defini- tion disc format) “Learn” the DISC MENU, TOP MENU, or other key as named on the original remote in the Guide learning position.
-
Page 56: Setting Up Netcommand Control Of An A/V Receiver
Setting Up NetCommand Control of an A/V Receiver Perform this setup to: • Operate the A/V receiver’s power and volume functions with the TV’s remote control. • Enable the A/V receiver to switch automatically to the correct audio input when you select a device in the TV’s Input Selection menu. - Page 57 Setting Up NetCommand Control of an A/V Receiver, continued Setup to Control Automatic Switching of A/V Receiver Audio Inputs Two different setups are described here: Setup 1: Automatic A/V Receiver Switching to TV Audio Input. Setup 2: Automatic A/V Receiver Switching for a device sending audio directly to the A/V receiver.
- Page 58 Setting Up NetCommand Control of an A/V Receiver, continued • If the text stops flashing before the check mark appears, repeat this step. To erase the IR code just “learned,” press CANCEL • while the name is highlighted. 5. Press to highlight the name Input1.
- Page 59 Setting Up NetCommand Control of an A/V Receiver, continued 5. Press to highlight the name Input2. Assign a custom name that matches the input name dis- played on the A/V receiver. For this example, enter the custom name DVD using the guidelines given earlier.
- Page 60 6. NetCommand...
-
Page 61: Appendices
Appendices Appendix A: Specifications ..... . . Appendix B: Bypassing the Parental Lock ....Appendix C: TV Guide Daily . -
Page 62: Appendix A: Specifications
14.2/5.7 Picture Technology and Power Consumption Item Specifications Color active matrix LCD, 1920 x 1080 dots, LCD Screen 16:9 aspect ratio LT-40133/40134: Direct Type 22 CCFL Backlight LT-46133/46144/52133/52144: Direct Type 24 CCFL LT-40133/40134: 250 w Power LT-46133/46144: 270 w LT-52133/52144: 340 w Channel Over-the-Air: VHF 2–13, UHF 14–69... -
Page 63: Appendix B: Bypassing The Parental Lock
Appendix B: Bypassing the Parental Lock IMPORTANT Cut along the dotted line and file bypass instructions in a safe place for future reference. Appendices Bypassing the Parental Lock After you set the lock, you must use your pass code to view a locked program, view the locked TV, view a locked channel, cancel the lock, or enter the Lock menus. - Page 64 Appendices This page intentionally left blank...
-
Page 65: Appendix C: Tv Guide Daily
Appendix C: TV Guide Daily “Active” Selection Source and Channel Information Clock Video Window Ad Panel Channel Call Letters This appendix explains the free TV Guide Daily service (available on model LT-40134 only). This optional service provides the following features: •... - Page 66 Appendix C: TV Guide Daily Navigating the Guide Guide navigation is easy - a “highlight” is moved around the screen, using the TV Remote CH/PAGE buttons. The highlight indicates the currently “active” tile (location) in the Guide. Help and program information is accessed with INFO.
- Page 67 Appendix C: TV Guide Daily Modify Guide Setup From the Guide Setup screen, you can change channel lineup, change channel display settings, and view setup progress (e.g., when the next listings update will occur). To select channel lineup: You can view or change (if more than one available) the channel lineup, using the following procedure: •...
- Page 68 TV Guide Daily Troubleshooting Tips Symptom 1 When I enter the Guide I see a Setup Progress screen. 2 Listing reads “Listings Pending.” 3 Tiles in Listing read “No Listing” or “Title Unavailable.” 4 Tiles in Listing read “Turned Off.” 5 There are repeated (or missing) time slots in the Listings.
-
Page 69: Appendix D: Programming The Remote Control
Appendix D: Programming the Remote Control This appendix explains programming the TV’s remote control to operate other A/V devices. This is distinct from NetCommand control. The TV’s remote control can operate other devices by three different methods: • Remote Control Programming: You must move the slide switch to the position specific to the type of device. -
Page 70: Programming The Remote Control
Appendix D: Programming the Remote Control, continued Programming the Remote Control Move the slide switch at the top of the remote to the position for the product you want to control. Refer to the table below. Only one of each device type can be controlled in each slide-switch position. -
Page 71: Programming Codes
Appendix D: Programming the Remote Control, continued Programming Codes Audio Amplifiers Brand Code Acurus 30765 Adcom 31100, 30577 Altec Lansing 31742 Aragon 30765 Bel Canto 31583 Design Bose 30674 Carver 30892 Classe 31462, 31461 Curtis Mathes 30300 Durabrand 31561 Elan 30647 30078 Harman/Kardon... - Page 72 Appendix D: Programming the Remote Control, continued Programming Codes, continued CD Players Brand Code Aiwa 30157 Akai 30156 Arcam 30157 Audio-Technica 30170 Burmester 30420 California Audio 30303, 30029 Labs Carver 30437, 30299, 30179, 30157 Classic 31297 Denon 30873, 30034, 30003 30000 DMX Electronics 30157...
- Page 73 Appendix D: Programming the Remote Control, continued Programming Codes, continued Cable Boxes Brand Code Optimus 10021 Pace 11877, 10237, 10008 Panasonic 10107, 10021, 10000 Panther 10637 Paragon 10000 Philips 11305, 10317, 10153, 10031, 10027, 10025 Pioneer 11877, 10877, 10533, 10144, 10023 Popular 10400 Mechanics...
- Page 74 Appendix D: Programming the Remote Control, continued Programming Codes, continued DVD Players/Recorders Brand Code 20785 Nesa 20717 Next Base 20826 NexxTech 21402 Norcent 21265, 21107, 21003, 20872 Onkyo 20792, 20627, 20503 OptoMedia Elec- 20896 tronics Oritron 20651 Panasonic 21762, 20703, 20632, 20503, 20490 Philips...
- Page 75 Appendix D: Programming the Remote Control, continued Programming Codes, continued Satellite Receivers Brand Code Toshiba 11749, 11285, 10819, 10790, 10749 UltimateTV 11640, 11392 Uniden 10724, 10722 US Digital 11535 USDTV 11535 Voom 10869 Zenith 11856 VCRs and DVRs Brand Code 21972 Admiral 20479, 20209,...
- Page 76 Appendix D: Programming the Remote Control, continued Programming Codes, continued VCRs and DVRs Brand Code Pioneer 20067 Polk Audio 20081 Portland 20020 Profitronic 20240 Proscan 20761, 20760, 20202, 20060 Protec 20072 Pulsar 20039 Quarter 20046 Quartz 20046 Quasar 21162, 20162, 20077, 20035 RadioShack 21037, 20000...
-
Page 77: Appendix E: Troubleshooting
Appendix E: Troubleshooting TV Reset Comparison Guide You can resolve many common TV problems using the reset functions described in the following table. See also the additional troubleshooting suggestions later in this appendix. IMPORTANT Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast Reset Name When to Use... - Page 78 Appendix E: Troubleshooting, continued Reset Name When to Use Side Panel Lock To re-enable the side- Release panel controls after activation of the Side Panel Lock System Reset If the TV does not turn on or off, does not respond to the remote control or side panel buttons, or has audio but no video.
- Page 79 Appendix E: Troubleshooting, continued General TV Operation Symptom The TV remote control does not work. The TV remote POWER button blinks five times. TV does not respond to the remote control or to side panel controls and TV will not power on or off.
- Page 80 Appendix E: Troubleshooting, continued TV Power On/Off Symptom TV takes an excessively long time to power You cannot program the TV to turn on auto- matically (Timer function) The TV will not turn on after being plugged TV turned itself off and the light on the front panel started to blink.
- Page 81 Appendix E: Troubleshooting, continued Picture Symptom Picture from an HDMI input is noisy (poor quality). The image from a computer appears dis- torted when viewed on the TV. Sound (see also NetCommand troubleshooting for A/V receiver setup) Symptom There is no sound even when the volume is turned up.
- Page 82 Appendix E: Troubleshooting, continued NetCommand (LT-40134, LT-46144, and LT-52144 models only) Symptom Cannot see the menu from the A/V Receiver. NetCommand unable to learn specific device keys. The A/V Receiver is the selected audio source but there is no sound. There is no sound when I switch to the A/V receiver using the Speaker setting in the AV menu, even though I have physically...
-
Page 83: Trademark And License Information
Trademark and License Information LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABIL- ITY OR FITNESS FOR A PARTICULAR PURPOSE. -
Page 84: Mitsubishi Tv Software
Mitsubishi TV Software END-USER LICENSE AGREEMENT FOR EMBEDDED SOFTWARE IMPORTANT – READ CAREFULLY: This License Agreement is a legal agreement between you (either an individual or an entity) and Mitsubishi Digital Electronics America, Inc. (MDEA) for all software pre installed and/or provided along with this television (“Software”). By utilizing this television and Software, you agree to be bound by the terms of this License Agreement. -
Page 85: Warranty
Mitsubishi LCD Flat Panel HDTV Limited Warranty MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this LCD Flat Panel HDTV that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of improper workmanship and/or material: a. -
Page 86: Index
Index A/V Memory Reset 77 A/V Receiver Adding NetCommand Control 56, 57, 58, 59 and the TV Speakers 39 and TV’s Remote Control 56, 69 Audio Lock 70 Codes 71 Connecting 11, 12, 25, 57 Controlling Sound Volume 16 A/V Reset 10, 77 Adjust Keys (Up/Down/Left/Right) 28, 36 Anamorphic Picture Format 32... - Page 87 PAUSE Key 28 PerfectColor 37 PerfectTint 37 Photo Viewing 35 Picture AV Menu Controls 37 Format Displays 33 Picture Quality and Film Mode Troubleshooting 80 Picture Mode 38 Power Consumption Energy Mode 44 Power On/Off Troubleshooting 80 QV Key (QuickView™) 28 and FAV Key 31 Remote Control Keys and Functions 28, 29...
- Page 88 For questions, call Consumer Relations at © 2007 Mitsubishi Digital Electronics America, Inc. 853B542B40 Website: www.mitsubishi-tv.com E-mail: [email protected] 800-332-2119 To order replacement or additional remote controls or Owner’s Guides Visit our website www.mitsuparts.com or call 800-553-7278 SYSTEM RESET If the TV does not respond to the remote control, side panel controls, or will not power on/off, press the SYSTEM RESET button on the side panel with a pointed object, such as the point of a pencil or end...