Quick Links

Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Power consumption motor
Voltage
Length of mains cord
Freezing time of cooling disc
Weight of product
Dimensions product l x w x h
Type no. cooling disc
Speeds
Cooling disc/container is to be kept in a 3 or 4-star freezer or
freezing compartment of the refrigerator.
The stirrer should actually be functioning when the bowl is
being fi lled otherwise the ingredients will immediately freeze
onto the cooling disc.
Safety shut-off
The ice-cream maker is equipped with a safety shut-off.
This device automatically switches off the appliance after
120 minutes of operation, or if overloading occurs.
Cooling down time: approx. 55 min.
Soft
Compact
wt/rd
wt/rd (x)
rd
rd
1
2
3
Hall
Published by Philips Domestic Appliances and Personal Care
4322 277 00155
99/12
PCS 101 330
Cucina
:
30 W
:
220/230 V, 50-60 Hz
:
140 cm
:
18 hrs
:
3.4 kg
:
23 x 25 x 27 (cm)
:
HR 2968
:
2
wt
rd
4
DAP0153
Ice-cream selector switch
When the "soft ice" switch is pressed, the stirrer will start
rotating at a relatively high speed (approx. 70 rpm, gradually
decreasing to approx. 50 rpm., depending upon the mixture).
After approx. 20 minutes, the green pilote light will start to blink.
Up to 10 minutes after switching on, you can switch from making
"Compact ice" to making "Soft ice" (or the other way round).
If "Soft ice" has been selected and the ice-cream maker is not
been switched off after 30 minutes, the appliance will reduce
stirrer speed to keep the "Soft ice" longer in optimum condition.
When the "Compact ice" switch is pressed, the stirrer will start
rotating at a relatively low speed (approx. 21 rpm).
After approx. 40 minutes, the green pilot light will start to blink.
The blinking pilot light means that the minimum processing time
for a standard quantity of the selected type of ice cream has
elapsed.
SERVICE INFORMATION
- Gas pressure may cause the cooling disc to bulge out
so that it is impossible to assemble it into the appliance.
If this has happened proceed as follows:
1. Remove plug (item 16) which is fi xed with snap tabs.
2. Bring the cooling disc back into its original fl at shape and,
while doing so, insert a new plug (item 16).
- Use grease 4822 390 20004 on the metal gearwheel shafts
in the gearbox.
- Motor control without de-soldering (see wiring diagram):
Resistance must be between 1-2 = 440 ± 50 ohm and
between 3-4.
- If a repair has been executed, make sure that all functions of
the appliance are working correctly.
Printed in the Netherlands
© Copyright reserved
Ice-cream maker
HR 2305/B
Subject to modification
loading

Summary of Contents for Philips HR 2305/B

  • Page 1 - If a repair has been executed, make sure that all functions of the appliance are working correctly. DAP0153 Hall Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4322 277 00155...
  • Page 2 HR 2305/B DAP 0151 1 4203 065 62360 upper housing 11 4822 466 62531 buffer 2 4822 321 62806 hall assy 12 4822 466 62608 sealing ring 3 4822 214 70585 pcb 220 V 13 4203 065 62390 lower housing...